Hey guys, figured i would just keep this page updated
Current status as of July 8' 2017 CEPM Pictures on PG 37
Re: BB6 - Thusee from Toronto!
Posted: Sun Mar 09, 2014 6:24 pm
by thusee
RSX Steering wheel!
Posted: Sun Mar 09, 2014 6:27 pm
by rob quilter
Looking good.
Re: BB6 - Thusee from Toronto!
Posted: Sun Mar 09, 2014 6:28 pm
by thusee
Restored my headlights today as well.
Before Right side
After Right Side
Before Left Side
After Left Side
Final:
Re: BB6 - Thusee from Toronto!
Posted: Sun Mar 09, 2014 6:28 pm
by thusee
rob quilter wrote:Looking good.
Thanks !
Posted: Sun Mar 09, 2014 7:01 pm
by nitin_s1
Nice!!!
Re: BB6 - Thusee from Toronto!
Posted: Mon Mar 10, 2014 12:48 am
by thusee
^ Thanks, picking up another set of wheels tomomorrow Will be a spring set, and then ill have the ap1 wheels for summer!
Re: BB6 - Thusee from Toronto!
Posted: Wed Mar 12, 2014 9:37 pm
by thusee
Finally changed the knock sensor!
Old
And this is how it was hanging above the oil filter...
Used
What a difference the knock sensor makes. Bought the car with the engine light on with a defective knock sensor.....man what a difference now i love it even more!
Re: BB6 - Thusee from Toronto!
Posted: Fri Mar 14, 2014 2:49 pm
by thusee
Figured i would post this:
This is what i used for the headlights to restore them. There was no sanding involved.
Also not in the picture is a glass cleaner.
1) Sprayed the lense with glass cleaner to give it a little clean up.
2) Spread a layer of Light to Medium Polishing compound, and then added more to the pad and went at it and constantly adding a little more compound as i kept rubbing.
3) Wipe away all the compound and constantly rotating the towel around so its always a clean side
4) Spread a layer of Medium to heavy rubbing compound and did the same thing.
5) Wipe away all the compound and constantly rotating the towel around so its always a clean side
6) Applied the cleaner wax let it sit for a bit and then wipe it all off!