Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
JEBB4’s Prelude BB6 SiR
- JEBB4
- Supporter 2014
- Posts: 1232
- Joined: Tue Feb 18, 2014 7:28 pm
- My Generation: 5G
- Location: Australia
- Has thanked: 82 times
- Been thanked: 69 times
JEBB4’s Prelude BB6 SiR
Yeah I did put the details into carVX and got info but build year said N/A
My BB6 buildJamie P 2013 wrote:i like tits
viewtopic.php?f=17&t=54187
My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866
My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321
-
Online
- Posts: 528
- Joined: Mon Jan 07, 2013 2:53 pm
- My Generation: 5G
- Location: Northants
- Has thanked: 19 times
- Been thanked: 131 times
JEBB4’s Prelude BB6 SiR
My type s is 1001421, and first registered dec’96.
Am assuming that sir’s type s’ etc. numbers ran concurrently, so must be a really early one.
Not sure when manufacturing started- Sept 96?
Am assuming that sir’s type s’ etc. numbers ran concurrently, so must be a really early one.
Not sure when manufacturing started- Sept 96?
- JEBB4
- Supporter 2014
- Posts: 1232
- Joined: Tue Feb 18, 2014 7:28 pm
- My Generation: 5G
- Location: Australia
- Has thanked: 82 times
- Been thanked: 69 times
JEBB4’s Prelude BB6 SiR
Ahh that is interesting information, yes it must be a 96 build year then.. thanks for that…
My BB6 buildJamie P 2013 wrote:i like tits
viewtopic.php?f=17&t=54187
My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866
My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321
- JEBB4
- Supporter 2014
- Posts: 1232
- Joined: Tue Feb 18, 2014 7:28 pm
- My Generation: 5G
- Location: Australia
- Has thanked: 82 times
- Been thanked: 69 times
JEBB4’s Prelude BB6 SiR
Finally got an afternoon to spend on this thing..
Car has been sat collecting dust since early February so today i decided to knock the dust off it..
I loves me some fresh wax beading
Also the fact that 3 of the wheels were missing centre caps was annoying me and looked jobby so I stole the centre caps off of the cl9’s original wheels, which just so happen to be the same size wheel and tyres as the prelude so might throw them on in future to see what they look like but for know t caps have cleaned the blades up nicely
The interior of the car seems to be in pretty good condition overall with no signs of ever being disassembled in the past (no tool marks) so I will be doing a full deep clean in future (wet vac etc) but firstly I wanted to get the mess in the boot sorted out..
I can only imagine the previous owner had taken many trips to the beach, threw his soaking, sand filled togs in the boot and never cleaned it out.. there was sand everywhere and the cardboard cover was rooted..
The spare wheel holding screw had completely seized into the boot floor which meant that the plastic piece span and came away instead… so that was nice…
Found a rusty old 17mm spanner
Then I give it a quick degrease and wipe down to asses the damage..
That’s good enough for now, it will get cleaned up with a wire wheel and rust converter applied, then a lick of primer and paint in near future..
Other items of note are that the car has an intermittent ABS warning light that comes on occasionally, didn’t appear for ages when I first bought it but then came on as I set off one day, today it was on as soon as I started her but then it went off and stayed off even when drove around the block (VTEC works ).. I will check codes as a starting point.
Also the car has got stem seal issues as it smokes like a trooper if left to idle for a while but I know I can do stem seal’s without removing the head so not too fussed.. it will need fresh fluids, t belt and water pump and that’s before I’ve actually even lifted the car and looked underneath
Oh yeah and it’s having a manual conversion once project ek1 is sold
Car has been sat collecting dust since early February so today i decided to knock the dust off it..
I loves me some fresh wax beading
Also the fact that 3 of the wheels were missing centre caps was annoying me and looked jobby so I stole the centre caps off of the cl9’s original wheels, which just so happen to be the same size wheel and tyres as the prelude so might throw them on in future to see what they look like but for know t caps have cleaned the blades up nicely
The interior of the car seems to be in pretty good condition overall with no signs of ever being disassembled in the past (no tool marks) so I will be doing a full deep clean in future (wet vac etc) but firstly I wanted to get the mess in the boot sorted out..
I can only imagine the previous owner had taken many trips to the beach, threw his soaking, sand filled togs in the boot and never cleaned it out.. there was sand everywhere and the cardboard cover was rooted..
The spare wheel holding screw had completely seized into the boot floor which meant that the plastic piece span and came away instead… so that was nice…
Found a rusty old 17mm spanner
Then I give it a quick degrease and wipe down to asses the damage..
That’s good enough for now, it will get cleaned up with a wire wheel and rust converter applied, then a lick of primer and paint in near future..
Other items of note are that the car has an intermittent ABS warning light that comes on occasionally, didn’t appear for ages when I first bought it but then came on as I set off one day, today it was on as soon as I started her but then it went off and stayed off even when drove around the block (VTEC works ).. I will check codes as a starting point.
Also the car has got stem seal issues as it smokes like a trooper if left to idle for a while but I know I can do stem seal’s without removing the head so not too fussed.. it will need fresh fluids, t belt and water pump and that’s before I’ve actually even lifted the car and looked underneath
Oh yeah and it’s having a manual conversion once project ek1 is sold
My BB6 buildJamie P 2013 wrote:i like tits
viewtopic.php?f=17&t=54187
My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866
My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321
- vanzep
- Supporter 2016
- Posts: 6979
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 254 times
- Been thanked: 396 times
JEBB4’s Prelude BB6 SiR
looks good - wonder if the water in the boot is due to rear light gaskets needing replaced...cleaned up well though.
ive been thinking about manual conversion on my white 97 sir BB6
ive been thinking about manual conversion on my white 97 sir BB6
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- JEBB4
- Supporter 2014
- Posts: 1232
- Joined: Tue Feb 18, 2014 7:28 pm
- My Generation: 5G
- Location: Australia
- Has thanked: 82 times
- Been thanked: 69 times
JEBB4’s Prelude BB6 SiR
Yeah I’d say you are right there, all hondas seam to suffer with that issue..
ahh yeah your car looks like a really good example, you should do the conversion I’d say it would be easy to source parts over there to do it.. and much cheaper than here in Aus, go for it
My BB6 buildJamie P 2013 wrote:i like tits
viewtopic.php?f=17&t=54187
My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866
My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321
- JEBB4
- Supporter 2014
- Posts: 1232
- Joined: Tue Feb 18, 2014 7:28 pm
- My Generation: 5G
- Location: Australia
- Has thanked: 82 times
- Been thanked: 69 times
JEBB4’s Prelude BB6 SiR
New helping old…
She’s very Smokey now, I have turned her around in the garage so that I can do valve stem seals, timing belt and coolant pump…. One day
She’s very Smokey now, I have turned her around in the garage so that I can do valve stem seals, timing belt and coolant pump…. One day
My BB6 buildJamie P 2013 wrote:i like tits
viewtopic.php?f=17&t=54187
My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866
My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321