Page 1 of 1

5th gen auto obd1 ECU?

Posted: Mon Oct 09, 2017 8:46 pm
by crxdriver
Im good with obd0 from my CRX's but havnt worked all that much with obd1 and 2 or even auto's. After doing some research im pretty sure i need to get a P72 if i want to keep the Duel runner system in my h22. If i don't i can get any of the chippable ECUs such as P28 P30. But where do i stand with the auto? I need a auto obd1 ECU im guessing? Any help much appreciated.

Thanks.

Posted: Mon Oct 09, 2017 8:50 pm
by mercutio
Not many people have tuned the auto ecu and fewer still have done an obd2 to 1 swap in fact i dont know many at all

Posted: Mon Oct 09, 2017 9:03 pm
by crxdriver
I think you slightly misunderstand me? Im not after tuning anything to do with the auto if possible? I just want to tune the engine fuel and timing for optimum power after i fit a few mods. Thanks.

Posted: Mon Oct 09, 2017 9:20 pm
by newkid
5th gens are obd2. Depending on what you do depends on which route to take.

Posted: Mon Oct 09, 2017 9:43 pm
by crxdriver
I have a obd2 to obd1 rywire harness and checked it fits. I just need the ECU to chip and plug in.I can chip it myself as i used to chip and tune ECUs all the time back in the day. Just never had to install them lol.

Posted: Sat Oct 14, 2017 7:29 pm
by crxdriver
Hi im still in need to know what ECU i need to get? Any help appreciated, Thanks.

Posted: Sun Oct 15, 2017 10:45 am
by vanzep
maybe have a look at Robs thread on the V2 spoon copy chips - some good info that might help :)

http://www.ludegeneration.co.uk/prelude ... t1089.html

Posted: Sun Oct 15, 2017 12:16 pm
by crxdriver
I did look through all 26 of the pages and im pretty sure i need a auto ECU but just want to be sure. Someone must have chipped a 5th gen auto lude and knows 100% surely? They are expensive now and i want to be sure i get the right ECU. Thanks :)

Posted: Sun Oct 15, 2017 1:49 pm
by RattyMcClelland
Can't be done unless you do aem route. Same issue as atts ludes.
Manual conversion them obd1 swap.

Posted: Tue Oct 17, 2017 6:27 pm
by crxdriver
Thanks for clearing this up. Looks like i will wait until the manual swap is complete then. Thanks.