Page 1 of 1

Vehicle speed sensor

Posted: Wed May 16, 2018 5:45 am
by blockh3ad
Can anybody help where do I find the vehicle speed sensor is it the speedo cable?

Posted: Wed May 16, 2018 8:39 am
by vanzep
The VSS is bolted to the top of the gearbox. Its quite difficult to see as it is quite far back in the bay and only a bit of it is visible :)

Posted: Wed May 16, 2018 10:57 am
by crxdriver
Take off the intake pipe and you will see a lot better. Its also not cable and is electric.

This is a accord box but it looks the same and is in the same position iirc:
Image

Posted: Wed May 16, 2018 11:36 am
by Merlin
The VSS on the 4th gen has two rubber pipes from the power steering attached to it as well as the electric wiring.

Posted: Wed May 16, 2018 1:41 pm
by vanzep
crxdriver wrote:Take off the intake pipe and you will see a lot better. Its also not cable and is electric.

This is a accord box but it looks the same and is in the same position iirc:
Image
on the 4th gen its in a different position - further back towards the firewall ;)
Merlin wrote:The VSS on the 4th gen has two rubber pipes from the power steering attached to it as well as the electric wiring.
yeah thats right the two rubber hoses that come off it connect to metal pipes that are fixed to the subframe - you can disconnect them from there but power steering fluid will come out so have a rag and a tub handy :)

Posted: Wed May 16, 2018 1:43 pm
by vanzep
sometimes its just the connector &/or wiring that that needs replaced so its also worth mentioning you can unscrew the electrical connector from the top of the vss - i replaced mine a while back and fitted a new connector and fixed the damaged wiring (with help from Merlin. You can get the connector for £3 or £4 from ebay - take a week or so to arrive from China. ;)

Posted: Wed May 16, 2018 1:50 pm
by NafemanNathan
Image

Posted: Wed May 16, 2018 2:12 pm
by vanzep
thats it :)
pain in the arse to get to - quite low down in the bay..

Posted: Mon Jun 18, 2018 9:10 pm
by blockh3ad
Vss replaced and working fine thanks guys :D

Posted: Mon Jun 18, 2018 10:35 pm
by vanzep
:10: