Thanks for all your help
Just to close things out:
1991-2. BB1 JDM H22a Manual 4th Gen
Denso Alternator part number. 100211-8740
CJP75
Thanks for the list of spare parts Drax.
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Weird electrical issue 4th gen BB1-FIXED
- vanzep
- Supporter 2016
- Posts: 6994
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 258 times
- Been thanked: 402 times
Weird electrical issue 4th gen BB1-FIXED
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
- vanzep
- Supporter 2016
- Posts: 6994
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 258 times
- Been thanked: 402 times
Weird electrical issue 4th gen BB1-FIXED
I did think about fixing the old alternator but found a brand new one at a reasonable price.
The one i bought turned up today so had a good look at new and old side by side - only difference i can see is that the pulley is 65mm dia on the new one and 60mm on the old one - so new one is 5mm bigger dia on the pulley - depth and number of ribs is the same. I swapped over the one small bracket (a clip goes on top of that and this holds the loom in place). I dont think the pulley diametre is going to make any difference but i can always swap the old pulley over if needed.
Ive not tested it yet but will update once it is fitted.
The part is WAI 13538N
Some pics:
The one i bought turned up today so had a good look at new and old side by side - only difference i can see is that the pulley is 65mm dia on the new one and 60mm on the old one - so new one is 5mm bigger dia on the pulley - depth and number of ribs is the same. I swapped over the one small bracket (a clip goes on top of that and this holds the loom in place). I dont think the pulley diametre is going to make any difference but i can always swap the old pulley over if needed.
Ive not tested it yet but will update once it is fitted.
The part is WAI 13538N
Some pics:
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC