Lude Generation

The AC should start blowing cold straight away. It wont 'last' though if your not moving however. If the car has been in the sun, you wont get any appreciable affect at all (as the dash has all the heatsoak being black). Revs don't really seem to come into it as far as I can tell - just movement of ...

I'm sure you will know, but to keep the system in good order, be sure to use the AC regularly, even in the winter months (I leave mine on all the time). The gas going around also carries lubricant,, which stops various seals from drying out. Once they dry out and shrink, you get a leak and the gas l...

Are you sure its oil? If you sprayed a lot of carb cleaner into the intake, the dislodged carbon/cleaner mix would look like oil. The valve guides don't really control the oil, the tops of the valves stems are only lubricated by the odd splash of oil (which sort of sits in the top of the seal). It's...

25th May sounds great.

I'll start the list:

1) Vtecmec
2) RattyMcClelland
3) nalla
4) wurlycorner
5) Drax - possibly
6) Scott560 (maybe 2 cars if I can find an assistant!)

Valves can get sticky/stuck in the guides, especially if there is a history of carbon build up from the leaking seals. You can try to break the stickiness of the valves by tapping them with a hammer and drift. NOT bearing on the retainer, but bearing on the valve stem itself with a drift, give them ...

It'll sound clattery, but just loosen them way off and get it to fire. Once it's ran for a bit and compression is back, you can then let the car cool completely overnight and then do the clearances. I wrote a long post ages ago about the written service manual method (and how I didn't like it). It a...

Is there a little history to the car? is this a project you bought with broken belt, or is it your car and you drove it and it all works but just the belt snapped? Seems odd that the dizzy would die during the work. I cant see how timing could go wrong, the lower sprocket is keyed to the crank with ...

Thanks for posting - my sky box HD bit the bullet whilst I was on holiday so we lost all our recordings! I'll try and download it when i get chance.

how did the refurb go? I noticed my ATR callipers, the lip that holds the dust seal in place is fairly corroded which would make a refurb borderline unfeasible.

My friend has an old 7th gen civic (breadvan type), and the seam sealer has cracked/gone porous on the roof joins, and the effects are pretty bad. I would try to seal it up once we have had some dry weather (so as to ensure you are not trapping moisture in where possible), and take some preventative...