Lude Generation

I like the sound of the FITV valve.....will look at that...
Have already sprayed throttle body with carb cleaner and no change

Thanks for the help so far. Happy xmas

1997 2.2 Vti...108000 miles.....On cold mornings the car starts fine and runs ok for a few minutes. It's cold in my village so around 2 degrees I start driving and a Mile up road at 1st junction car stalls (2.2 auto) H22 motor. Its seems like it runs on auto choke on initial startup and as it comes ...

So I have cleaned and checked all the items around the gear lever and have left the centre consol off for easy checking if it happens again...........and so far problem hasn't come back. Its starting every time. I opened the small relay I found on the side of the lever and opened and cleaned the con...

Got it all stripped and don't see anything wrong... I'm going to leave the covers off and monitor for the next few days

Hi all Intermittently I turn the key and car will not crank - all dash lights come on normally Ive found that if I bang and knock the auto gearlever it will soon start normally. Also if I release the lever lock and move the lever around violently it will start when I go back to park It is happening ...

I seem to have a squeeking noise from my rear rack when turning
It only happens when rear wheels turn
Any ideas on how to fix
See one mention of lube into the locking pin hole

Hi all..........I just factory reset my tablet forgetting i had the Prelude's manual that I downloaded off the net in it
Been looking for a few days now and can't find the complete Gen 5 manual.
Please can fellow luders help?

Thanks
Rob

THANKS FOR THE TIP
Im watching it now

My car has old fashioned key entry but it does open both doors via central locking.
Is it possible to get keyfobs to open remotely?
I found kits on ebay but dont see any fitting instructions
I believe the central locking ecu is under the back seat
Any help appreciated

So after installing a new 4WS ECU (in the boot on the rhs) and resetting it now all works fine. The ECU was preventing me from doing the reset procedure. So for anybody wanting to check their 4WS 1. start by downloading the manual 2. try reset 3. try fuse 11 removal or battery disconnect 4. get a me...