Lude Generation

Thanks guys, its a tough one to sort, bring back the choke cable :lol: it only takes a few minutes for the engine to warm up, so I will just have to live with it till I get a full tune up and maybe a remap, but thats another story. Vtecmec, Ive bought a JDM under bonnet fusebox with the ELD installe...

Cheers guys Im sorted now, thanks for looking

Hi all, I am having trouble with my idle on start up and electrical load effecting my tick over causing stalling , my car has just done a f20a4 to H22vtec swap, i have added a euro type R IM. and TB, the throttle body has no manual idle adjustment (I think it is electronically controlled from the ec...

Good luck lads, enjoy,

Thanks for the offer Stefan, I take it the brake discs are 5 stud,
Yes I will need all parts for the conversion, as I'm hoping 270hp engine needs stopping

I am after a set of front brake assemblies for my F20a4 BB3 Lude, they need to be in good working order and be 4 stud 282mm dia. Thanks for looking

my 4g Lude was a f20a4 engine and now has a H22a1 fitted the car is a BB3 ukdm which had a P11 ecu, I have the choice of two ecu's a p27 and a p13 G01 what would the best ecu to fit and what chip to use. NB. the ecu harness on the ukdm is different pinout to the usdm and jdm, iv'e added in the vtec ...

Thanks Vtecmec, my original engine harness fits the H22 all plugs fitted (some a bit tight around the dizzy and alternator) I did have a H22 engine harness but it was so butchered by the breaker yard Uggs. they cut through the the alternator harness and aircon pump harness. In the end I stripped out...

Thanks a lot lads, I will study the info you sent me, and I will publish my findings , i'm sure it will help future bb3 uk luders for a swap

Thanks for that, but the wiring colours don't match a p27 or p13 pinout connectors, I have no documentation on this bb3 lude!! only USDM & JDM info, But I will physically check the routing of the plugs to get a practical grasp on the routing, I will publish my findings as soon as the weather get...