FRUSTRATION! grrrrrrrrrrrrrrrrrrrrrrrrrr......

nitin_s1 · Post by **nitin_s1** » Fri May 25, 2012 11:58 am

Merlin wrote:For some reason almost every USDM 5G has front bumper sag

Weak support beam? I had that on my JDM Sir but never on the UKDM.

Post by **Lude-dude** » Fri May 25, 2012 12:00 pm

I had sagging on the front with the oem bumper

and mugen bumper for that matter

you need new clips, probably missing

Post by **Merlin** » Fri May 25, 2012 12:09 pm

nitin_s1 wrote:
Merlin wrote:For some reason almost every USDM 5G has front bumper sag
Weak support beam? I had that on my JDM Sir but never on the UKDM.

Who knows but its almost all of them. They must be at least slightly different as they have to have that polystyrene jobby in there.

nitin_s1 · Post by **nitin_s1** » Fri May 25, 2012 12:14 pm

Merlin wrote:Who knows but its almost all of them. They must be at least slightly different as they have to have that polystyrene jobby in there.

That must weigh it down a bit and hence the bumper sag for the USA? Who knows lol

Post by **lewd lude lover** » Fri May 25, 2012 12:25 pm

you just have to remove the bumper and reposition the crash bar. The mounting holes are elongated up and down to give about 10mm difference end to end. Pound to a pinch its just slipped down. otherwise you just need to tug the metal supports up a bit. do this anyway.

get it all nice and high and then see where its at.

its a mornings tinkering.

macky_6 · Post by **macky_6** » Fri May 25, 2012 2:20 pm

lewd lude lover wrote:you just have to remove the bumper and reposition the crash bar. The mounting holes are elongated up and down to give about 10mm difference end to end. Pound to a pinch its just slipped down. otherwise you just need to tug the metal supports up a bit. do this anyway.

get it all nice and high and then see where its at.

its a mornings tinkering.

Hopefully

Post by **Donald** » Fri May 25, 2012 2:31 pm

Mine doesn't sag but I think mine was in a front end prang because one side sits further back than the other (against the bits that come down between the headlights/grille.