Done brakes today and noticed one of the rear calipers was sticking which has worn away most of one of the brake bads so now need new rear brake pads.CARRisma wrote:Roughly in order:
- - Replace that broken piece of plastic which holds the bonnet support pole (watch this space for suggested upgraded part). = DONE
- Clean out inappropriate copper grease from brake caliper slide pins and correctly apply silicone grease (yes, my bad). = DONE
- Get a piece of metal fabricated which the boot lid torsion bar clip slots into because the area under my rear parcel shelf is damaged.
- Fabricate a cooling plate out of black corrugated plastic.
- Respray the paint damaged rear skirt.
- New magnetic sump plug.
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Prelude Plans 2014
- CARRisma
- Posts: 902
- Joined: Tue May 01, 2012 11:30 am
- My Generation: 5G
- Location: Horley, Surrey
- Has thanked: 20 times
- Been thanked: 38 times
- Contact:
2000 Honda Prelude 2.2 VTi (H22A8 / BB8).


- nitin_s1
- Posts: 10499
- Joined: Tue Aug 03, 2010 1:09 pm
- My Generation: 5G
- PSN GamerTag: N171N
- Location: London
- Has thanked: 147 times
- Been thanked: 135 times
- Contact:
nitin_s1 wrote:I've added some bits on the list.. Maybe its plans for 2014/2015 now.![]()
2014/2015 -nitin_s1 wrote:Just cleaned my garage and shocked to see so many parts waiting to be fit on.![]()
Engine mounts They are for sale.. [If they don't sell then they will go on the car]
De-Cat Not on the car
Red Carpet and Console. DONE
Strut braces (rear) Done
ATR brake set up Done
ATR manifold (still need to find some info and will defo need Emanage before I put this on) SOLD this.
Motegi Sides Skirts Done
Mugen rear bits and a bonnet bra (not sure if I want them)Sold and don't want it
- Get the front end re-spray and minor rust sorted. [Nearly there after the headlights]
- Sort out fuel/air ratio as it's running rich.
- Full exhaust system.
- S2000 steering wheel install [Done]
- Pushki
- Supporter 2015
- Posts: 2635
- Joined: Sat Aug 07, 2010 9:21 pm
- My Generation: 4G
- PSN GamerTag: Luigi_Black
- Location: Bluff Creek
- Has thanked: 2 times
- Been thanked: 10 times
Pushki's Prelude plans for 2014
1. Clean Engine Bay (after driving through muddy floods for 2 months) - DONE!
2. New Dizzy Cap, Rotor Arm and NGK Double Platinum Spark plugs - DONE!
3. Replace Clutch Fluid - DONE!
4. Replace Engine Oil & Filter - DONE!
5. Degrease and Hammerite all suspension arms - DONE!
6. Replace Brake Fluid - DONE!
7. Replace Coolant
8. Replace PAS Fluid
9. Replace Front Stabilizer links - DONE!
10. Fit new Black Diamond Brake Disks
11. Refurbish & Paint Brake Calipers
12. Fit New Brake Pads
13. Major clean inside and out
14. Fit Summer Wheels
I also have a list for next year too.......
1. Clean Engine Bay (after driving through muddy floods for 2 months) - DONE!
2. New Dizzy Cap, Rotor Arm and NGK Double Platinum Spark plugs - DONE!
3. Replace Clutch Fluid - DONE!
4. Replace Engine Oil & Filter - DONE!
5. Degrease and Hammerite all suspension arms - DONE!
6. Replace Brake Fluid - DONE!
7. Replace Coolant
8. Replace PAS Fluid
9. Replace Front Stabilizer links - DONE!
10. Fit new Black Diamond Brake Disks
11. Refurbish & Paint Brake Calipers
12. Fit New Brake Pads
13. Major clean inside and out
14. Fit Summer Wheels
I also have a list for next year too.......
