Left over parts from my lude years - anyone?
Posted: Tue Jan 20, 2015 8:06 pm
Hi,
I wanted to post in the parts for sale section but I haven't got individual pictures of these items I want to clear. So here goes...
Once I replaced the 4th Gen with an S2000 I sold loads of parts which I had left over quite quickly. I am now still sat on a pile of parts which are too good to scrap, so I would like to know if anyone would be interested in making me an £ offer for a job lot of parts, probably to be collected in a small van.
I have some chassis parts which are the biggest heaviest.
ALL PARTS FROM 4TH GEN BB1
Front Chassis cross-member (large one under the bulk-head)
Rear 4WS cross-member - de-rusted and primed in BH zinc
Front anti-roll bar JDM - no rust original
De-rusted trailing arms - poly bush maybe?
Front lower control arms - de-rusted and primed in BH zinc paint inc bushes
Rear upper arms - need new ball joint pressing in
1 Set of 4 clean OEM springs - original paint and colour marks - no rust from a 95 with 70k miles
1 Set of 4 clean OEM dampers - original paint
1 Set of 4 assembled OEM struts - JDM inc springs and damper forks
1 Front bumper mount - no rust
1 Front bumper bar support - clean no rust
1 Rear bumper bar support - clean no rust
1 Washer bottle with both electric pumps
1 Pair of rear interior panels (grey cloth)
1 OEM Air box inc pipe and resonator box etc
1 Facelift Front passenger side nostril - working freed nuts (grey)
1 Spare saver wheel - mint
1 Set of 4 15" 5 spoke OEM wheels & tyres (need refurb)
Some Electrical items
JDM dash wiring loom inc. daylight sensor ( I have the other 2 cc sensors too - outside temp - interior temp)
Dash lens
JDM auto clocks (92)
This is the stuff I need to sell soon. Or I will be getting a divorce. I cant bin it all.
I appreciate some of this stuff would be only of use to someone restoring a car or rebuilding one, but its possible someone has one with a front end smash and is looking for the bumper mounts etc.
Someone pay me and take it all away and make use of it...
I wanted to post in the parts for sale section but I haven't got individual pictures of these items I want to clear. So here goes...
Once I replaced the 4th Gen with an S2000 I sold loads of parts which I had left over quite quickly. I am now still sat on a pile of parts which are too good to scrap, so I would like to know if anyone would be interested in making me an £ offer for a job lot of parts, probably to be collected in a small van.
I have some chassis parts which are the biggest heaviest.
ALL PARTS FROM 4TH GEN BB1
Front Chassis cross-member (large one under the bulk-head)
Rear 4WS cross-member - de-rusted and primed in BH zinc
Front anti-roll bar JDM - no rust original
De-rusted trailing arms - poly bush maybe?
Front lower control arms - de-rusted and primed in BH zinc paint inc bushes
Rear upper arms - need new ball joint pressing in
1 Set of 4 clean OEM springs - original paint and colour marks - no rust from a 95 with 70k miles
1 Set of 4 clean OEM dampers - original paint
1 Set of 4 assembled OEM struts - JDM inc springs and damper forks
1 Front bumper mount - no rust
1 Front bumper bar support - clean no rust
1 Rear bumper bar support - clean no rust
1 Washer bottle with both electric pumps
1 Pair of rear interior panels (grey cloth)
1 OEM Air box inc pipe and resonator box etc
1 Facelift Front passenger side nostril - working freed nuts (grey)
1 Spare saver wheel - mint
1 Set of 4 15" 5 spoke OEM wheels & tyres (need refurb)
Some Electrical items
JDM dash wiring loom inc. daylight sensor ( I have the other 2 cc sensors too - outside temp - interior temp)
Dash lens
JDM auto clocks (92)
This is the stuff I need to sell soon. Or I will be getting a divorce. I cant bin it all.
I appreciate some of this stuff would be only of use to someone restoring a car or rebuilding one, but its possible someone has one with a front end smash and is looking for the bumper mounts etc.
Someone pay me and take it all away and make use of it...