Page 1 of 1
oilfilter relocation kit
Posted: Tue Sep 01, 2015 3:50 pm
by lammy426
anybody bought one of the alloy ones with m20 and 3/4" adaptors ,i'm after the 3/4 ones which you don't use on a prelude,thanks john
Posted: Tue Sep 01, 2015 3:57 pm
by NafemanNathan
Hey John,
What thread are you wanting to adapt from? Or is it just the extension piece you need?
Like this?...
http://www.ebay.co.uk/itm/Oil-Cooler-Fi ... 43df0dec1b
Posted: Tue Sep 01, 2015 4:06 pm
by lammy426
its not that mate,its the 3/4 fitting out of a kit like this one
http://www.ebay.co.uk/itm/151579881021? ... EBIDX%3AIT
bought the kit and it came without the 3/4 fittings and with the time difference and language barrier its like pulling teeth from china and i thought with hondas using the 20mm ones in the kit somebody on here will have the 3/4 ones in a draw somewhere
Posted: Tue Sep 01, 2015 4:08 pm
by lammy426
thread is 20 x 1.5 male tp 3/4 x 16 male and the other is 27 x 1.5 male to 3/4 x 16 female
Posted: Tue Sep 01, 2015 4:20 pm
by NafemanNathan
Ok, so just to clarify, you need one end to be 3/4"x16 male to screw into your block and the other end to be M27x1.5 male to screw into the adapter?
Or you could use a 3/4"x16 male x 3/4"x16 male to screw into the M27, which would do the same job?
That right? It is the block adapter we're talking about right?
Posted: Tue Sep 01, 2015 4:27 pm
by lammy426
its both ends i need it came without the fitting to go onto the block and the fitting which the reloated filter screws onto
Posted: Tue Sep 01, 2015 5:39 pm
by lammy426
http://s926.photobucket.com/user/lammy4 ... sort=3&o=0
number 1 is m27 x 1.5mm male to 3/4" x 16tpi female
number 2 is m20 1.5mm male to 3/4" x 16tpi male
hope this helps and somebody as them before i order more from china,many thanks john