Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Fuel line leak update

Banter goes here, and doesn't have to be Lude related
Free Ranj Egg
Posts: 607
Joined: Sun Jan 31, 2016 6:11 pm
My Generation: 5G
Been thanked: 7 times

Fuel line leak update

Post by Free Ranj Egg » Thu Mar 08, 2018 9:08 am

Hello Gents,

Hope everyone is well. So me and a mate jacked the lude up yesterday and took the cover off for the fuel lines and had a look.

The rubber line is fine its the steel line it attaches to that has completely rusted and is shagged.

The other line that runs next to it is also rusted. So it makes sense to replace both.

My question however is this...

1.) If we replace the entire line or cut out the shagged parts and replace it with a stainless steel braided rubber line, how will it hold together? Will jubilee clips work?

2.) Or is it just better to see if someone here is breaking a car and get the used lines which will basically stop all the faffing around.

Any help is appreciated gents.

Ranj
I came before the chicken.. The argument is now settled!!

H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red

User avatar
Drax
Moderator
Posts: 6268
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 16 times
Been thanked: 381 times

Post by Drax » Thu Mar 08, 2018 9:43 am

i'd ask around for 2nd hand lines, see what's out there - do you have two ends that the hardline can be taken off and replaced quite easily between rubber sections?
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

Free Ranj Egg
Posts: 607
Joined: Sun Jan 31, 2016 6:11 pm
My Generation: 5G
Been thanked: 7 times

Post by Free Ranj Egg » Thu Mar 08, 2018 10:16 am

Cheers bud
I came before the chicken.. The argument is now settled!!

H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red

vtijon
Posts: 23
Joined: Wed Aug 12, 2015 6:52 pm
My Generation: 5G
Been thanked: 6 times

Post by vtijon » Thu Mar 08, 2018 6:16 pm

I've had the same issue and used rubber fuel hose and hose clips. I had to cut some of the plastic covering off the metal lines to find rust free metal ( I had to lower the pipe by removing some of the clips that hold the pipe in place in order to cut the pipe ). On the rubber line the plastic release clips wouldn't release so I cut the fittings off the rubber lines aswell ( I think these are metal lined ) The fuel hose fits over both metal and rubber lines.

Free Ranj Egg
Posts: 607
Joined: Sun Jan 31, 2016 6:11 pm
My Generation: 5G
Been thanked: 7 times

Post by Free Ranj Egg » Fri Mar 09, 2018 9:05 am

vitjon - Thanks bud. I can get 5 metres of lines for £60 odd quid.

The pipes are metal and are rusted. So when you cut the pipes what did you use to put them back together? As in what type of clips were they?

I have some pictures of the pipes and will post them tonight when I get a chance. Apparently photobucket isn't used any more so whats the best way to up load the pics?
I came before the chicken.. The argument is now settled!!

H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red

User avatar
Drax
Moderator
Posts: 6268
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 16 times
Been thanked: 381 times

Post by Drax » Fri Mar 09, 2018 9:56 am

Free Ranj Egg wrote:Apparently photobucket isn't used any more so whats the best way to up load the pics?
imgur 8-)
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

Free Ranj Egg
Posts: 607
Joined: Sun Jan 31, 2016 6:11 pm
My Generation: 5G
Been thanked: 7 times

Post by Free Ranj Egg » Fri Mar 09, 2018 10:23 am

Cheers Drax - hope you are well mate.
I came before the chicken.. The argument is now settled!!

H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red

vtijon
Posts: 23
Joined: Wed Aug 12, 2015 6:52 pm
My Generation: 5G
Been thanked: 6 times

Post by vtijon » Fri Mar 09, 2018 3:47 pm

I used mini fuel hose clips which are available on eBay

Free Ranj Egg
Posts: 607
Joined: Sun Jan 31, 2016 6:11 pm
My Generation: 5G
Been thanked: 7 times

Post by Free Ranj Egg » Fri Mar 09, 2018 4:42 pm

Cheers bud will look into that this weekend.
I came before the chicken.. The argument is now settled!!

H22A8 197 motor with 190k on the clock
Tanabe lowering springs.
Skunk 2 megapower exhaust with a decat
M2B4 LSD Gearbox
Lightened flywheel
S2000 Steering Wheel
Type S Door inserts in Red

User avatar
Drax
Moderator
Posts: 6268
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 16 times
Been thanked: 381 times

Post by Drax » Fri Mar 09, 2018 8:36 pm

Free Ranj Egg wrote:Cheers Drax - hope you are well mate.
I'm good cheers bud :) hope to see you at a meet soon!
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

Post Reply

Return to “General Chat”