Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Abingdon track day 16/10/2020

Banter goes here, and doesn't have to be Lude related
Scott560
Posts: 1320
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 19 times
Been thanked: 214 times

Abingdon track day 16/10/2020

Post by Scott560 » Wed Oct 21, 2020 4:57 pm

Bah humbug - seems pretty hard to find matching discs front and back these days for such an old car from the same manufacturer.

Brembo don't list an ATR front disc (300x28) - parts catalogue here ( https://www.bremboparts.com/europe/en )
Borg and beck don't list a rear prelude 5th gen - parts catalogue here ( https://webcat.borgandbeck.com/Home )
MTEC have both avail - choice of styles, but no plain as far as I can see - could go for slotted only...

Cant seem to find a decent dixcel listing/catalogue , but doesn't look like prelude/accord type R (CH1) are available.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

User avatar
norks27
Supporter 2016
Posts: 1093
Joined: Sun Oct 25, 2015 10:58 am
My Generation: 5G
Location: Sutton, Surrey
Has thanked: 109 times
Been thanked: 52 times

Abingdon track day 16/10/2020

Post by norks27 » Wed Oct 21, 2020 5:42 pm

Fitted some MTEC grooved discs to my HR-V
Obviously I'm not looking for performance, and use Blueprint pads, but seems good quality to me.
Recommended, I know another Lude that has MTEC discs.

Some pics:

Image

Image
Image

Scott560
Posts: 1320
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 19 times
Been thanked: 214 times

Abingdon track day 16/10/2020

Post by Scott560 » Wed Oct 21, 2020 6:19 pm

It was MTEC I was using previously, and had no issue until they cracked at the holes (drilled and grooved), perhaps ill just go for the grooved this time.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

User avatar
RattyMcClelland
Moderator
Posts: 9191
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 181 times

Abingdon track day 16/10/2020

Post by RattyMcClelland » Wed Oct 21, 2020 6:42 pm

I got the discs from Cox motorparts. They arrived in brembo boxes for my accord type r setup so I assumed they were brembo made.
I use brembo 350z discs on my new setup.

Dixcel pads are imported from here. Torque GT do them too.
https://www.rhdjapan.com/dixcel-front-b ... t-ka9.html
https://www.torque-gt.co.uk/dixcel-z-ty ... r-cl7.html
Image

Scott560
Posts: 1320
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 19 times
Been thanked: 214 times

Abingdon track day 16/10/2020

Post by Scott560 » Wed Oct 21, 2020 7:43 pm

I found a few listings for CL7 euro type R stuff, but assume these are different to CH1 Accord type r (non euro) - most listings show these as separate setups?

Eitherway, I've gone for a stock set up so I can get the car going again.

MTEC grooved only discs front/rear with silver coating.
set of 4 MTEC hoses.
Genuine Honda OEM ATR pads based on the OEM part number.
Brembo standard rear pads - There seems 2 parts listed for 185bhp vs 200bhp MK5s (p28022 vs p28039), they were cheap so bought both types and will compare thoroughly. I suspect they are interchangeable as many listing show them as the same fitment.

Treated myself to a hand pumped pressure bleed system also, with universal reservoir cap, and another 2 litres of fluid.

If the pedal doesn't firm up after this - then I'll look into the master cylinder replacement (or perhaps ATR swap if possible).
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

User avatar
RattyMcClelland
Moderator
Posts: 9191
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 181 times

Abingdon track day 16/10/2020

Post by RattyMcClelland » Wed Oct 21, 2020 7:52 pm

All the pads are the same.
Image

Dino
Posts: 1690
Joined: Wed Jul 20, 2011 1:30 pm
My Generation: 4G
Location: Monmouth
Has thanked: 1 time
Been thanked: 8 times

Abingdon track day 16/10/2020

Post by Dino » Sat Nov 14, 2020 11:37 am

Pad of choice for me are Carbonne Lorraine RC6 pads front with Ebc Redstuff rears using bremtech grooved discs.

Post Reply

Return to “General Chat”