IAC Valve picture?
Posted: Tue Jan 31, 2012 9:35 pm
Does anyone have a good clear picture of the IAC Valve please? 
Page 1 of 2
Posted: Wed Feb 01, 2012 7:23 am
No
Posted: Wed Feb 01, 2012 9:00 am
Attached to the engine?
Posted: Wed Feb 01, 2012 9:18 am
Here you go Pushki
Posted: Wed Feb 01, 2012 11:38 am
Thank you vanzep. 
If you have one.Merlin wrote:Attached to the engine?
Posted: Wed Feb 01, 2012 11:40 am
What info are you after?
Posted: Wed Feb 01, 2012 11:46 am
I was thinking about cleaning mine, not because it's sticking but just for reassurance. 
Posted: Wed Feb 01, 2012 11:50 am
Well, I cleaned mine before I had the manifold fitted, and after the manifold was fitted my idle is a constant 1000 RPM, never changes. Not sure if something is bust inside or they didn't fit it correctly (they're a good garage so I'm sure they fitted it fine... )
So I'd recommend leaving it if it's working!
)So I'd recommend leaving it if it's working!
Posted: Wed Feb 01, 2012 11:53 am
I would reccomend this also, there are little rubber o-rings in there to be lost or damaged if you open it up.JayJay wrote: So I'd recommend leaving it if it's working!
Posted: Wed Feb 01, 2012 11:56 am
Isn't that a good thing that your idle is constant?
Okay, I'll leave it alone.
What about the FITV? Should I clean/adjust that?
Okay, I'll leave it alone.
What about the FITV? Should I clean/adjust that?