Skunk2 intake + 68mm throttle body price?

Post by **DaveyBa8** » Sun Jul 21, 2013 6:00 pm

how much would a skunk2 intake manifold with a larger honda 68mm throttle body and a brand new Zerg racing thermal intake gasket be worth on the 2nd hand market? im thinking for breaking the prelude and selling bits.

LewisH · Post by **LewisH** » Sun Jul 21, 2013 6:03 pm

Not sure, but i will keep an eye on what price you put on it =p

Post by **DaveyBa8** » Mon Jul 22, 2013 1:09 am

Any bodiessss? Just looking for a rough price, thanks.

Froidas · Post by **Froidas** » Mon Jul 22, 2013 7:34 am

I don't like "whats the prices for that" threads, because price is an agreement between seller and buyer. It may differ quite much from "public price". But if you need help, maybe this will help:

Several years ago I bought one for about 120 pounds including shipping from US. Only manifold, in original box, used, but condition was like new, even the "Skunk2" plate was separate and with original protective sticker.

It depends on the condition of yours. If it's good, sum up the brand new price, subtract 20-80 pounds and try to sell.

Post by **Merlin** » Mon Jul 22, 2013 9:04 am

In the region of £250 I would have thought. It is dependent on condition of course.

Post by **DaveyBa8** » Mon Jul 22, 2013 9:55 am

Cheers lads, I'm only asking because I'm just not sure what its worth, condition is refurbished, only I put a new stud in as one was snapped. Ill be probably be selling it over this side of the pond and i dont see any for sale. Thanks merlin

Post by **Drax** » Wed Jul 24, 2013 12:13 pm

if that's £250 posted, and depending on condition, id be interested in buying it from you Davey

nitin_s1 · Post by **nitin_s1** » Wed Jul 24, 2013 12:44 pm

There was a bargain Skunk2 intake sold couple of months ago for under £160 (IIRC)

But they sell for around £220-250ish..

Post by **DaveyBa8** » Wed Jul 24, 2013 12:54 pm

Mmmm this is it here, I'd prob keep injectors and fuel rail unless anyone knows if the F22b has same size injectors. New gasket cut between 68mm TB and manifold, and thermal gasket. Sensors there to everything cleaned up, Not sure if ill sell it yet but I will let you know.

So when I put the new stud in if you look at the last injector there's a very slight tilt on it I don't think this would affect at all. It's an easy fix if wanted to be.

Post by **DaveyBa8** » Sat Oct 12, 2013 8:59 pm

Anyone interested in this?