Tensioner bits/bolts

Post by **Asacei** » Fri Feb 21, 2014 12:12 pm

Hi

I'm in the process of removing the H23 Manual timing tensioner arrangement that’s currently on my engine and reverting back to the auto tensioner arrangement (although using the Kaizenspeed manual adjuster rather then the honda auto one)..

I have the main pulley assembly (18) in the diagram in this link:

http://www.lingshondaparts.com/honda_ca ... ck_03=6370

basically I think I need - 20, 24, 35, 38 (Im not going to be running balance shafts so I don’t believe I need 30, 10, 13, 32 etc but feel free to correct me)

thanks

Post by **indigolemon** » Fri Feb 21, 2014 12:20 pm

I don't have the bits sorry! But wondered why you're swapping from the H23 setup to the Kaizenspeed one?

Post by **vanzep** » Fri Feb 21, 2014 1:41 pm

I might have most if not all these parts - will dig them out over the weekend and let you know.

Post by **Asacei** » Fri Feb 21, 2014 4:39 pm

that would be great, thanks Vanzep

To answer the question why am I doing this – there are few things: I prefer the slightly simpler set up the manual/keizenspeed setup gives, I have a keizenspeed manual tensioner to hand, the engine is not currently in the car so seems like a good time to do it - Also read that the H23 setup uses a slightly larger pulley to the stock one and therefore puts greater stress on the belt (I have not yet compared the two side by side yet but if true adds another reason)

Post by **Asacei** » Mon Feb 24, 2014 2:23 pm

http://www.lingshondaparts.com/honda_ca ... ck_03=6370

Turns out I only need parts 19 and 24.....any one happen to have them, could do with them in a hurry

thanks

Post by **Merlin** » Mon Feb 24, 2014 2:25 pm

Asacei wrote:could do with them in a hurry

Honda can order them in for you to collect next day

Post by **Asacei** » Mon Feb 24, 2014 2:40 pm

Merlin wrote:
Asacei wrote:could do with them in a hurry
Honda can order them in for you to collect next day

.....hahahaha...was hoping to keep some of the cost (particularly 24) towards some slightly more exciting bits

Post by **Merlin** » Mon Feb 24, 2014 2:42 pm

It is the quickest way though if you are needing them in a hurry

Post by **vanzep** » Mon Feb 24, 2014 2:43 pm

Ive checked and got 19 and 24 here.
can put up a pic if needed buit parts are in excellent condition

Post by **Asacei** » Mon Feb 24, 2014 2:47 pm

Excellent, thanks - no worries on the picture I'll take your word for it (to be fair not a great deal that can go wrong with them really) . Let me know how much and where to send payment