Lude Generation

hi im looking for a stub axle for a 5th gen passenger side , don't need caliper or disc , just the stub axle , an could any one tell if a 4th gen would fit to or off something else jap thanks in advance guys

it maybe a 4 stud hub with hub leg seem to get lots of names for this part lol

Do you mean driveshaft? On the passenger side there is the intermediate shaft (the shaft that comes out of the gearbox) and that connects to the outer driveshaft.

Also for what car do you require one for? 2L or 2.2 VTEC, manual or auto? When it comes to driveshafts you have to use the correct one for your car.

Merlin wrote:Do you mean driveshaft? On the passenger side there is the intermediate shaft (the shaft that comes out of the gearbox) and that connects to the outer driveshaft.

Also for what car do you require one for? 2L or 2.2 VTEC, manual or auto?

Think he means the whole hub assembly, stubs will be meaning the studs, after a 4 stud one as its a 2.0 5th gen i believe. @w1ggz should be able to help out as 4th gen ones should be able to be swapped over?

Ahh! cool That is the rear spindle assembly.

If it is that then yeah I can help

that's the one mate wiggz has it , I have a 2.0 5th gen man passenger side is the one I want thanks

yeah its the whole hub assembly

@merlin you might know, are the full hubs different on the rear between 4th and 5th gen? I know the bearings are interchangeable but not sure about the rear hubs as from memory they run different antiroll bar links.

this is a front one newkid