Lude Generation

As above for a 5g 2.2 vti please.
Thank you, Toby

yhpm

I do not have a full conversion but should have some parts, like: manual starter motor, mounts, clutch mastwr cylinder, pedals.

Let me.know id you are interested

And I have the standard flywheel and gearbox 84000 miles, no crunches or problems.

It has been quite a while since my last visit (I'll put it down to outside commitments), but the search is back on for a manual conversion for my 5th gen 2.2.
Cash is waiting, if anyone can help that would be great.
Thank you

just what is it your after all the parts, someone to do the conversion or both?

I have everything you need still on the car, but how soon do you need it?

Need to at least get the car moved to a suitable location then you're welcome to get the parts off yourself if you're desperate - will be about 45 mins from you.

Not seen anything more on this, so I don't know if you and Donald had been in conversation and sorted it?
If not, then I should be able to help from my 4g breaker, leaving only a few small 5th gen specific bits that would be easy to pick up.

I think this is what is needed and are all bits I could be provided;
- Gearbox
- Flywheel (from a spare H22A2)
- Clutch (could provide a used one from H22A2 but tbh recommend you buy a new one)
- Clutch master cylinder and hydraulic damper/hose
- Clutch and brake pedal assemblies
- Gear lever/gate mechanism assembly (full assembly with all bolts/brackets)
- Gear linkage cables (full assembly with all brackets etc.)

Not sure if these are needed and if 5th gen specific or not;
- Gearbox mount? (would a 4th gen mount work, or does it need to be 5th gen?)
- Drive shafts? (do any bits of the drive shaft need to be changed? If so, can they come from a 4th gen?)

Would then need these 5th specific parts;
- Manual gear lever surround
- Dash clocks (unless you're not bothered about retaining the auto display)
- Manual ECU???


So, if someone can confirm what else is/isn't needed and whether some of the things I'm not sure of are 5th gen specific or 4th gen interchangeable, we could get this sorted?

You're right on the gearbox mount being different. Also, not entirely sure but I think the shift cables are different?

@sir si
Can you confirm what 4th gen parts you used when you converted your 5th gen please.
Thanks,