Page 1 of 2
h22a8 engine, or h22 bare block
Posted: Tue May 26, 2015 1:40 pm
by tahu
Ok so after a couple gentleman's sausage ups im left with 2 dead blocks, and because it is so hard to find anyone to hone the frm sleeves im left with not many options,
so really im after a h22a8 bottom end and head , or just a h22a8 or h22a5 bare block.
Posted: Tue May 26, 2015 3:21 pm
by Drax
I have a good h22a8 bottom end spare bud, with pistons would be extra though.
I have just sold the a8 head from it though but I have a spare a8 here
http://www.ludegeneration.co.uk/prelude ... t3205.html
but the head will need a recondition, hence why its so cheap.
Posted: Tue May 26, 2015 4:41 pm
by tahu
pm'ed you drax
Posted: Tue May 26, 2015 4:50 pm
by Drax
replied
Posted: Tue May 26, 2015 7:04 pm
by ek9sid
A friend of mine is also after something similar. He'll have the h22a red top head from my old motor (span a bearing) but he needs the bottom end. Ideally with crank but rods and pistons are not essential
Posted: Wed May 27, 2015 9:15 am
by Drax
ek9sid wrote:A friend of mine is also after something similar. He'll have the h22a red top head from my old motor (span a bearing) but he needs the bottom end. Ideally with crank but rods and pistons are not essential
pm'd you bud
Posted: Wed May 27, 2015 9:18 am
by Merlin
tahu wrote:h22a8 or h22a5 bare block.
@tahu You know that these two are different?
Posted: Wed May 27, 2015 12:07 pm
by tahu
yeah after talking to a few people i know now they are different, but at the time i ment h22a8 complete or just the h22a5 block
Posted: Wed May 27, 2015 2:12 pm
by Drax
@Merlin H22a5 head onto H22 block with 10:1 pistons in them, this work ok as far as you can tell? seems to work to me, but id like to double check. His pistons are BBBB which match the Block as well.
Posted: Wed May 27, 2015 2:25 pm
by NafemanNathan
Think Merlin was referring to the crank journals mainly Drax.