Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

JDM 4G front fog light relay

Looking for something? Ask here
Post Reply
JohnnyB
Posts: 166
Joined: Sat Oct 16, 2010 6:18 pm
My Generation: 4G

JDM 4G front fog light relay

Post by JohnnyB » Wed Jun 03, 2015 1:16 am

If you've got one, or know where to get one, let me know - ta! Cheap is preferential :lol:

JB

User avatar
vanzep
Supporter 2016
Posts: 7146
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 306 times
Been thanked: 505 times

Post by vanzep » Wed Jun 03, 2015 8:35 am

From what i have read any 4 pin mitsuba 2201 relay or similar will do the job ;)
Ive got one or two here if you need
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
Angus
Posts: 307
Joined: Wed Dec 26, 2012 4:06 pm
My Generation: 4G
Location: New Deer, Aberdeenshire
Has thanked: 1 time

Post by Angus » Wed Jun 03, 2015 8:37 am

You can get one of those kits from Halfrauds and easily wire it in with that. Costs about a tenner IIRC.

I did that with mine, then wired it into a OEM switch on that wee panel to the right of the steering wheel (if you have the coin holder it replaces directly with the 3-switch panel out of any scrap car).

My back fog works from there too. And my middle switch is a USDM dash-brightness controller (which only changes the brightness by about 5% and is pretty useless to tell the truth). :)

I also fiddled my foggers so they come on with full beam headlights while I was at it.

User avatar
Angus
Posts: 307
Joined: Wed Dec 26, 2012 4:06 pm
My Generation: 4G
Location: New Deer, Aberdeenshire
Has thanked: 1 time

Post by Angus » Wed Jun 03, 2015 8:39 am

Which reminds me, is there not a piece of wiring loom that you have to install from the relay too, if you're keeping the standard wiring?

User avatar
vanzep
Supporter 2016
Posts: 7146
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 306 times
Been thanked: 505 times

Post by vanzep » Wed Jun 03, 2015 8:55 am

Yeah your right there is an short extension cable that allows you to locate the relay and bolt it under the dash - if you dont have this then apparently you can just plug the relay directly into the brown 4 pin connector...and they say any 4 pin mitsuba relay will do...info is from US forums so youd have to check out any differences depending if you have prefaclift/facelift and ukdm/jdm ;)
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

Post Reply

Return to “Wanted”