Spacers!!

[nitin_s1]

I am thinking about getting some spacers for my ATR/Motegi wheels as you can see in this pic they are really lost in the arch,





Not sure what size to get but @RattyMcClelland did recommend me 20mm all round.

But before I take the plunge, I want to see if anyone has any 20mm or 15mm spacers that they can borrow me so I can fit them and test it out first.

Let me know what you have. I will give you a surprise for the help.

[RattyMcClelland]

You will need hubcentric spacers with the extra bolts on as 10mm slip on spacers don't fit using original length studs/bolts.

[ek9sid]

Nitin, do your rear tyres not catch on the rear arches/bumper? (Presuming it is a 4ws).

Ever since putting those ones on mine that I got from you, the rears always catch when 4ws is operating (sorry to hijack the thread)

[nitin_s1]

Nitin, do your rear tyres not catch on the rear arches/bumper? (Presuming it is a 4ws).

Ever since putting those ones on mine that I got from you, the rears always catch when 4ws is operating (sorry to hijack the thread)

Type-S = No 4WS = Sex

[RattyMcClelland]

Nitin, do your rear tyres not catch on the rear arches/bumper? (Presuming it is a 4ws).

Ever since putting those ones on mine that I got from you, the rears always catch when 4ws is operating (sorry to hijack the thread)

Cut the tabs off and relocate the attachment.

[ek9sid]

Type-S = No 4WS = Sex

I love the 4ws but I'm starting to dislike it lol

Cut the tabs off and relocate the attachment.

I'll give this a try. Thanks

[cebul]

Get the wheels with proper offset

[nitin_s1]

What offset shall we look for? Or is good to fill arches ?

[cebul]

Definetelly lower that you have got now ; )

9 inch wide wheels and offset around 35 and less will fill arches nicely.