Lude Generation

After these as would like to poly bush them then fit to my bb4. Who's got what and prices please?
Thanks in advance

are 5g control arms the same ??? might widen the range for you

Yea merc they are. Only the front uppers are different. Even rear uppers are the same except the 5ths were stronger as a plate was fitted.

Edit. An as Rich pointed out the rear lower inner bush is different on a 5th and if it goes honda quote for a new arm but you can just use the bush from the 4th.

isnt that for the toe arm though not the suspension arm???

No bud. Even the 2ws subframe of a 5th can.fit a 4th and vice versa. Ill try find the post by PAW as ive asked all this before.

ok buddy

http://www.ludegeneration.co.uk/post954 ... 2ws#p95493

http://www.ludegeneration.co.uk/honda-p ... lit=%202ws

There you go

I did think the 5th gen lower arms are the same. So it's handy I've a 5th gen I'm breaking (an oak Tree jumped out in front of it as they do!) as I can use the rear uppers to. thanks for the answers guys. I'm can't use the rear lower arms though or the trailing arms as it's 4ws right?

Ludebob95 wrote:I did think the 5th gen lower arms are the same. So it's handy I've a 5th gen I'm breaking (an oak Tree jumped out in front of it as they do!) as I can use the rear uppers to. thanks for the answers guys. I'm can't use the rear lower arms though or the trailing arms as it's 4ws right?

Rear lower arms and trailing arms are the same on 4th and 5th gen bud so yes you can.

Its the 2ws/4ws subframe and the toearms that are different at the rear.

I have all the bushes
Top arms trailing bushes
Even the 2ws set up off from a 5th gen