Lude Generation

I'm looking for a return and breather fuel lines, I have a brand new feed line I got from a Honda dealer, but the return and breather are no longer available, anyone got these, or do you know where I can get them????

Sizes? Links to them?

Help this is all I need to go for an mot and to make her live again!!

I have them dude pm me!

Post edited, return and breather lines I need

Also need the two clips and rubber hoses the feed and return connect into aswell

Any pictures of the pipes u need

Well there are 3 lines, the feed the return and the breather, I can't get pictures because I can't get them off right now, basically behind the passenger side rear wheel, behind a plastic cover 2 pipes connect into two plastic clips that are part of a runner pipe, that's the feed and return

Is it only the bit at the wheel under the cover that's gubbed? I just cut it out and replaced with some high pressure hose and some jubilee clips Much less hassle.

Yeah that's what's broken, but I have no idea what to buy and what size to look for

indigolemon wrote:Is it only the bit at the wheel under the cover that's gubbed? I just cut it out and replaced with some high pressure hose and some jubilee clips Much less hassle.

7mm I think is the size you need. I have done this on my lude as well

ek9sid wrote:

indigolemon wrote:Is it only the bit at the wheel under the cover that's gubbed? I just cut it out and replaced with some high pressure hose and some jubilee clips Much less hassle.

7mm I think is the size you need. I have done this on my lude as well

Do I but 7mm or 8mm and force over the 7mm, I'm sure it's 7mm external 5mm internal