4th gen front hubs (ABS)

Post by **vanzep** » Tue Jul 12, 2016 10:43 pm

Decide to look again for a set of front hubs for my 4th gen
They need to come from a car with ABS.

What ya got

Samiya85 · Post by **Samiya85** » Tue Jul 12, 2016 11:41 pm

I have 5th gen 4 stud front and rear hubs with abs
Dunno if any one can confirm if they fit the 4th gen

Post by **newkid** » Wed Jul 13, 2016 2:20 am

Abs sensor attaches differently from memory so I'd say no.

Post by **vanzep** » Wed Jul 13, 2016 5:53 pm

Samiya85 wrote:I have 5th gen 4 stud front and rear hubs with abs
Dunno if any one can confirm if they fit the 4th gen

Thanks for the offer Sam but they need to be 4th gen hubs from a car equipped with ABS

Post by **vanzep** » Sun Jul 17, 2016 10:08 am

bump

preludemanh22 · Post by **preludemanh22** » Tue Jul 19, 2016 8:27 am

http://www.ebay.co.uk/itm/96-01-HONDA-P ... Sw7KJXELfv

preludemanh22 · Post by **preludemanh22** » Tue Jul 19, 2016 8:28 am

sorry that's 5thgen

K30DPC · Post by **K30DPC** » Tue Jul 19, 2016 11:59 am

newkid wrote:Abs sensor attaches differently from memory so I'd say no.

Also outer CVs are different

Post by **vanzep** » Tue Jul 19, 2016 9:21 pm

yes need to be 4th gen (92-96) 4 stud hubs from a lude that had ABS.
i dont need the upper wishbone or brake disc or abs sensor just the hub/knuckle with good lower ball joint and good bearing.
although i might consider ones with bad lower ball joints as i have replacements here that i can press in