Page 1 of 1
Accelerator Cable bracket for ATR manifold
Posted: Fri Sep 30, 2016 10:39 am
by vanzep
Im looking for an accelerator cable bracket off an ATR manifold - hope that someone has a spare one kicking about
Posted: Fri Sep 30, 2016 11:03 am
by NafemanNathan
Ideally you want the Rosko Racing one which allows the cable to pull in the right position, or make a custom one.
https://www.roskoracing.com/cgi-bin/com ... ey=200-014
The ATR one makes the throttle cable come in from quite a high angle. Here's mine...
Although you could modify an ATR one by bending it back on itself.
Posted: Fri Sep 30, 2016 12:05 pm
by vanzep
cheers nafe - good info
looks like modifying a standard ATR one might be the way to go
Posted: Fri Sep 30, 2016 12:20 pm
by Drax
i may have one lying around, i can check tonight
Posted: Fri Sep 30, 2016 7:54 pm
by vanzep
thanks
@Drax
Posted: Fri Sep 30, 2016 11:15 pm
by Drax
boom!!
Posted: Sat Oct 01, 2016 9:24 am
by vanzep
Nice one!
Posted: Fri Oct 07, 2016 2:35 pm
by vanzep
just wanted to say thanks to
@Drax for sending me this part
ive fitted it to mani but upside down and it looks like that might work
NafemanNathan wrote:Ideally you want the Rosko Racing one which allows the cable to pull in the right position, or make a custom one.
https://www.roskoracing.com/cgi-bin/com ... ey=200-014
The ATR one makes the throttle cable come in from quite a high angle. Here's mine...
Although you could modify an ATR one by bending it back on itself.
Nafe ive had a look and just turned the ATR bracket upside down - it looks like it might work - maybe you could check this on your 5th gen
