Page 1 of 1
4th gen airbag ring ASAP cash waiting
Posted: Mon Dec 05, 2016 10:33 pm
by jake_111
I'm after an airbag ring for a 4th gen (the round bit that goes behind the steering wheel with the wires coming out of it to connect to the steering wheel, in case I'm using the wrong name for it)
2.3 1994 car with cruise control and 4ws
Needed ASAP, can collect if within a couple of hours of Gloucestershire, otherwise I can do PayPal if you can post.
Any help greatly appreciated.
Posted: Tue Dec 06, 2016 8:15 am
by Scott560
Same as a 5th gen do you know? I've recently removed one from my 5th gen - can take a picture if you like...
I believe the term is rotary coupler - probably quite similar to other models (accord, perhaps even rover 600).
Posted: Tue Dec 06, 2016 11:20 am
by vanzep
sure ive got one - its a plastic spool thingy
Here is a pic
Posted: Tue Dec 06, 2016 12:18 pm
by jake_111
I don't think it is the same as a 5th gen, from what I've seen anyway.
I dont think it's the the one pictured above either, sorry. I'll do a bit more research and try and work it out. I haven't got the original as the car came with a Nardi steering wheel.
Posted: Tue Dec 06, 2016 4:19 pm
by vanzep
i got the part from
@newkid so sure he will be able to tell you what it came off
but sure it would be a 4th gen
Posted: Tue Dec 06, 2016 5:28 pm
by indigolemon
I've been here - it gets complicated quickly - @vanzep - that looks like it's from a non-airbag with cruise (three rings are horn, up, down). You then have the pre-facelift with airbag coupler, then the post-facelift with airbag coupler.
By the sounds of it, you want a pre-facelift with airbag rotary coupler. I did have one of these a loooong time ago, if I can find it, it's yours.
Posted: Tue Dec 06, 2016 5:50 pm
by vanzep
Ahh thanks Graham - good to know
Posted: Tue Dec 06, 2016 10:31 pm
by jake_111
It has got very complicated very quickly
@indigolemon
Do you think this looks like the part I need?
http://m.ebay.co.uk/itm/192027799185
Posted: Tue Dec 06, 2016 10:36 pm
by indigolemon
That does look very familiar - clock spring is the term for sure! I hit against this when I wanted to fit a leather 4G wheel from a facelift into my pre-facelift car. NB - I eventually gave up, ripped all that out, and fitted a DC2 wheel!
However that does mean I should have a pre-facelift clock spring in a box somewhere! I'll be at my storage on Thursday if you can hang off till then? As I said, if I still have it, it's yours for postage
Posted: Tue Dec 06, 2016 10:58 pm
by jake_111
Thank you
@indigolemon, keep me posted
