Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Trying to get my car back together (4th gen bits required)

Looking for something? Ask here
Post Reply
User avatar
Ash.Z
Supporter 2014
Posts: 371
Joined: Thu Feb 02, 2012 9:51 pm
My Generation: 4G
Location: Exeter
Has thanked: 1 time
Been thanked: 2 times

Trying to get my car back together (4th gen bits required)

Post by Ash.Z » Mon Sep 18, 2017 10:45 pm

Hi chaps, I've finally got round to getting the car back together and on track again, but I need a couple of bits if anyone can help please.
1. Rubber radiator mount on the bottom locating pins. It's about 1"1/4 round and 1/2" thick
2. On the rear calipers there is a retaining plate washer that prevents the handbrake cable passing through an eyelet.
3. I'm putting an A7 lump in but the crank pulley nut seems different from the standard H22A. I didn't get one wth the engine and need one that matches the A7 crankshaft.

Cheers Ash
Image
Hope for the best, prepare for the worst.

Post Reply

Return to “Wanted”