Trying to get my car back together (4th gen bits required)
Posted: Mon Sep 18, 2017 10:45 pm
Hi chaps, I've finally got round to getting the car back together and on track again, but I need a couple of bits if anyone can help please.
1. Rubber radiator mount on the bottom locating pins. It's about 1"1/4 round and 1/2" thick
2. On the rear calipers there is a retaining plate washer that prevents the handbrake cable passing through an eyelet.
3. I'm putting an A7 lump in but the crank pulley nut seems different from the standard H22A. I didn't get one wth the engine and need one that matches the A7 crankshaft.
Cheers Ash
1. Rubber radiator mount on the bottom locating pins. It's about 1"1/4 round and 1/2" thick
2. On the rear calipers there is a retaining plate washer that prevents the handbrake cable passing through an eyelet.
3. I'm putting an A7 lump in but the crank pulley nut seems different from the standard H22A. I didn't get one wth the engine and need one that matches the A7 crankshaft.
Cheers Ash