Well, after lowering the lude on BC coilovers, my ABS and 4WS light has come on, also after excessive rubbing in the wheelarch (this has been fixed).
I'm getting a 4WS error code: 35 and ABS error code: 4,8.
So after surfing the web, I've uncovered that its the Rear left ABS wheel speed sensor that needs changing. I've tested the actual sensor, and it seems to have a loose connection that doesnt seem easily fixable.
So does anyone have one? - Needs to be shipped to Denmark.
Cheers, Ben
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
WTB 4th gen rear left ABS speed sensor
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
- firstlude
- Posts: 998
- Joined: Sun Feb 08, 2015 9:41 pm
- My Generation: 4G
- Location: tiverton devon
- Been thanked: 5 times
you sure can i used a spare osr and fitted to the nsr just a matter of swaping the mounting strips over easy jobmart609 wrote:you can use any 4th gen sensor you just have to take it off the metal mounting bracket and just make sure the wire is long enough.
success is the ability to go from one failure to the next without any loss of enthusiasm
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
-
- Posts: 214
- Joined: Sun Nov 26, 2017 9:50 pm
- My Generation: 4G
- Has thanked: 2 times
- Been thanked: 15 times
WTB 4th gen rear left ABS speed sensor
Damn, sadly not. The 5th gen doesn't look the same as the 4th gen. So I'm not sure they would work.