Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Valve clearance tool

Looking for something? Ask here
Post Reply
newkid
Supporter 2016
Posts: 2665
Joined: Thu Feb 23, 2012 8:28 pm
My Generation: 4G
PSN GamerTag: spaz_ma_taz
Location: Edinburgh
Has thanked: 13 times
Been thanked: 50 times

Valve clearance tool

Post by newkid » Wed Mar 27, 2019 10:17 am

https://www.ebay.co.uk/itm/10mm-Jam-Nut ... %7Ciid%3A1

Anyone got one of these they would be willing to let me borrow?

Cheers

Scott560
Posts: 1320
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 19 times
Been thanked: 214 times

Valve clearance tool

Post by Scott560 » Wed Mar 27, 2019 10:20 am

Yeah i got one i can send - only used it 3 times lol.

I wrote up my prefered method for doing the job, as the honda manual i felt was easily misinterpretted.

PM me your address, ill send it up tomorrow.

Cheers,

Scott
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

User avatar
vanzep
Supporter 2016
Posts: 6960
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 251 times
Been thanked: 392 times

Valve clearance tool

Post by vanzep » Wed Mar 27, 2019 4:37 pm

Got one here (on loan from merlin/indigolemon?) and the feeler guages - been sitting in my kitchen for the last few months - thought youd seen them :lol:
still a 2 man job imo
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

Scott560
Posts: 1320
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 19 times
Been thanked: 214 times

Valve clearance tool

Post by Scott560 » Wed Mar 27, 2019 5:21 pm

nah you can do it single handed!

the 'dragging' is the part that really screws it up in my opinion. Also the picture of that tool is not showing the correct usage according to the Honda manual. feeler should go between cam and follower.

My method:

Slacken the lock nut.
Unscrew the adjustment a lot
Slip the larger of the range (8thou for exahust, 7thou for inlet if i remember) between the lobe and the follower (not the valve stem and adjustment screw)
Using light finger pressure only on the tool, tighten the adjustment screw until it stops.
You will feel a very distinct point at which the feeler gauge is touching both completely, as the screw can no longer be turned by light finger pressure.
that distinct point is very repeatable (unlike the drag method).
This is what i set mine to.
The feeler guage pulls out, its quite stiff but not crushed or marked (light finger pressure only remember!)

I find the drag method to be quite unrepeatable and fiddly, also requiring a second set of hands. Whilst following the drag method in the manual to the letter (light drag) i always found my setting was too large (and quite noisey/clackety). I'm guessing the finish on the feeler gauge could impact that.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

newkid
Supporter 2016
Posts: 2665
Joined: Thu Feb 23, 2012 8:28 pm
My Generation: 4G
PSN GamerTag: spaz_ma_taz
Location: Edinburgh
Has thanked: 13 times
Been thanked: 50 times

Valve clearance tool

Post by newkid » Wed Mar 27, 2019 10:45 pm

@Scott560 if @vanzep has one no need to send. He's local to me. Thanks for offer tho. Vanzep I'll get up an see you and borrow it.

User avatar
vanzep
Supporter 2016
Posts: 6960
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 251 times
Been thanked: 392 times

Valve clearance tool

Post by vanzep » Fri Mar 29, 2019 1:52 pm

yeah thats no problem but you will have to do my valve clearances after youve done yours :lol:
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

Post Reply

Return to “Wanted”