Lude Generation

As above, for BB8 Prelude

Needing the arm rest trim from the OSF doorcard, in black
Need a black centre console.
Black carpet trim panels around the lower dash
Lower dash support bracket (where your knees are) in black

Basically if your breaking a BB8 with black interior let me know

Also need a rocker cover stud, dont know if theyre different in size but its the one beside the distributor i need.

Any help appreciated

good luck getting a headstud on its own!

https://www.lingshondaparts.com/partsca ... f/E__0900/

over a tenner for an original lol. I cant remember if the bottom part of the stud actually retains anything - If not a bit of threaded rod would suffice, cut to length (deburred, loctited into the head)

Trying to get any parts for these seems diffucult

Hoping someone has a spare stud lying around, on Ebay the only one listed is in the USA...
If it comes to it then il just buy a new one, i could double nut it and make my own stud but for the sake of a tenner i would just buy a new one

Might be worth checking a local breakers, theres a red vti in the one local to me that i keep buying bits from and normally they're peanuts.

I've got a full set of interior stuff that has been carbon wrapped if that's any good

By center console, do you mean the stereo surround or the actual center console that goes over the gearstick and handbrake
If it's the stereo surround I have a black 1 also.

Got the carpet pieces for the center console all intact with clips. And should be able to sort out the dash support bracket if you can send me a pic of the exact piece that it is.

Rocker stud I'm guessing just the little bolts that secure the cover to the head

Yeah its the centre console around the gear stick/ handbrake i need. Ive just spotted one for £20 on ebay so il probably get that.

Im not sure how to post photos on here but ive screen grabbed and edited this photo to try illustrate http://prntscr.com/nisly4

If you see Scott560's post above the stud i need is number 15 on the diagram. If you have any metal clips that secure for the airbox that would be good too? 2 of mines are snapped due to corrosion

Let me know a price on the 2 peices of carpet trim, rocker cover stud and lower dash support bracket. Postage to EH548EQ

Ok so I know exactly what you need now. I'll have a go at the rocker stud. I've got a center console, will check condition. Will also check the dash support bar. If I can sort everything I will send you the lot for same price as the ebay center console

And I'll have a look for the airbox clips to, pretty sure I've got a couple.

2 x decent airbox clips sorted. Other 2 were proper rusty.

Head stud sorted. They are all the same size apart from the 2 under the plug cover. But I've took the stud off closest to the dizzy and put that aside.

Dash support bar I have, but it has a snapped clip. It is the 1 on the same side as the screw so doesn't really affect the fitting once screwed on.

Center console isn't bad, got a few marks here and there, mainly on the sides that you don't see when the seats are in. The armrest lid is carbon wrapped though and is part of the interior set I'm selling.

Excellent

I can use the arm rest i have here as its black, its just the lower plastic trim on the centre console thats cream on mines

Just send me a PM once you figure out how much you want for it all

you dont happen to have a black carpet aswell do you?