Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Air inlet hose

Looking for something? Ask here
EddieMunster
Posts: 186
Joined: Mon Apr 30, 2018 8:31 pm
My Generation: 5G
Has thanked: 14 times
Been thanked: 24 times

Air inlet hose

Post by EddieMunster » Sat May 30, 2020 11:19 am

Hi

Does anyone have the right-angle air hose from the plenum chamber to the throttle body?

Regards
5g 2.2 Motegi in Blue.

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21205
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1929 times
Been thanked: 236 times

Air inlet hose

Post by wurlycorner » Tue Jun 02, 2020 6:40 pm

Quite common that splits on 5th gens, unfortunately.

EddieMunster
Posts: 186
Joined: Mon Apr 30, 2018 8:31 pm
My Generation: 5G
Has thanked: 14 times
Been thanked: 24 times

Air inlet hose

Post by EddieMunster » Tue Jun 02, 2020 6:59 pm

wurlycorner wrote:
Tue Jun 02, 2020 6:40 pm
Quite common that splits on 5th gens, unfortunately.
And hard to find too..... :-)
5g 2.2 Motegi in Blue.

Parratt
Posts: 22
Joined: Tue Jun 09, 2020 1:23 am
My Generation: 5G
XBOX GamerTag: CRACKEDPARRATT

Air inlet hose

Post by Parratt » Tue Jun 09, 2020 2:13 pm

Put a pic up of the location and pipe for me and I'll see if I've got 1 on the car I'm breaking

EddieMunster
Posts: 186
Joined: Mon Apr 30, 2018 8:31 pm
My Generation: 5G
Has thanked: 14 times
Been thanked: 24 times

Air inlet hose

Post by EddieMunster » Tue Jun 09, 2020 2:19 pm

It's this, goes from the plenum to the throttle body.

Image
5g 2.2 Motegi in Blue.

Parratt
Posts: 22
Joined: Tue Jun 09, 2020 1:23 am
My Generation: 5G
XBOX GamerTag: CRACKEDPARRATT

Air inlet hose

Post by Parratt » Tue Jun 09, 2020 7:19 pm

I got ya ill see what I've got when I get up the yard thursday

User avatar
norks27
Supporter 2016
Posts: 1093
Joined: Sun Oct 25, 2015 10:58 am
My Generation: 5G
Location: Sutton, Surrey
Has thanked: 109 times
Been thanked: 52 times

Air inlet hose

Post by norks27 » Tue Jun 09, 2020 8:02 pm

@EddieMunster If the car being broken has an A8 engine then you'll be fine, the regular H22 doesn't have the posh dual chamber air intake that your Motegi has, (same intake as TypeS). I think the regular intake/air hose is narrower than the dual chamber one, pretty sure.
If it's an auto being broken I doubt the part will be right. - :(
Image

EddieMunster
Posts: 186
Joined: Mon Apr 30, 2018 8:31 pm
My Generation: 5G
Has thanked: 14 times
Been thanked: 24 times

Air inlet hose

Post by EddieMunster » Tue Jun 09, 2020 8:11 pm

norks27 wrote:
Tue Jun 09, 2020 8:02 pm
I think the regular intake/air hose is narrower than the dual chamber one, pretty sure.
You are indeed correct, by about 2mm-3mm, so I had to "load it onto a large socket" for a few days, with some heat, to get it to fit! It's fitted, not ideal, but it'll have to do unless a genuine item in good condition comes along.
5g 2.2 Motegi in Blue.

User avatar
norks27
Supporter 2016
Posts: 1093
Joined: Sun Oct 25, 2015 10:58 am
My Generation: 5G
Location: Sutton, Surrey
Has thanked: 109 times
Been thanked: 52 times

Air inlet hose

Post by norks27 » Tue Jun 09, 2020 8:21 pm

Nice one :thumbup:
I try to keep mine lubricated with tyre gel to stop the rubber drying out
Image

Parratt
Posts: 22
Joined: Tue Jun 09, 2020 1:23 am
My Generation: 5G
XBOX GamerTag: CRACKEDPARRATT

Air inlet hose

Post by Parratt » Tue Jun 09, 2020 8:23 pm

Ah ye it's an A5 sorry m8 good luck buddy

Post Reply

Return to “Wanted”