Wanted: H22 Clutch/Flywheel

Jackson Bondy · Post by **Jackson Bondy** » Mon Aug 03, 2020 4:48 pm

Hi all,

Been a while, hope you're all well.

Does anyone have a clutch or flywheel for a H22 going?

Thanks

Scott560 · Post by **Scott560** » Mon Aug 03, 2020 5:09 pm

I got a clutch, it was removed from my h22a8 , still has life left in it (only replaced as gearbox was off). You can have it for postage? Ill measure it. Its disc and cover , not sure if the release bearing is in there...

stefan · Post by **stefan** » Tue Aug 04, 2020 12:22 am

I have oem flywheel from a8 . If you want I'm open for offer as I'm not sure what is worth

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Tue Aug 04, 2020 10:40 am

If you're going for used, I'd recommend getting a flywheel and clutch that have come off the same engine, as a set.

All clutches/flywheels will wear slightly differently and if you take a clutch from one and a flywheel from another, even though they might both have plenty of life left you might still get engagement issues/slipping, or you could get accelerated wear while they bed in to match each other.

stefan · Post by **stefan** » Tue Aug 04, 2020 2:04 pm

wurlycorner wrote: ↑
Tue Aug 04, 2020 10:40 am
If you're going for used, I'd recommend getting a flywheel and clutch that have come off the same engine, as a set.

All clutches/flywheels will wear slightly differently and if you take a clutch from one and a flywheel from another, even though they might both have plenty of life left you might still get engagement issues/slipping, or you could get accelerated wear while they bed in to match each other.

I should have clutch as well

Can't remember what I kept of my sparkle yellow

Jackson Bondy, If you still interested let me know then I'll check in the attic

Scott560 · Post by **Scott560** » Tue Aug 04, 2020 2:23 pm

stefan wrote: ↑
Tue Aug 04, 2020 2:04 pm
attic

Parts hoarding to a new level! Once the garage shelves are full, parts are migrated to the dustbin. Wife would kill me if parts ended up in the house/attic!

Unless your garage has an attic of course....

stefan · Post by **stefan** » Wed Aug 05, 2020 1:02 am

Scott560 wrote: ↑
Tue Aug 04, 2020 2:23 pm
Wife would kill me if parts ended up in the house/attic!

To be honest my wife is pretty understanding about lude & all stuff

Just as an example

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Wed Aug 05, 2020 1:26 pm

Wife and house goals, right there!

Jackson Bondy · Post by **Jackson Bondy** » Wed Aug 05, 2020 4:30 pm

Thanks for the quick responses and tips everyone, this was for a manual conversion and sadly on further inspection the car just doesn't look like it's worth saving so no bits needed, another one going to the great scrapyard in the sky

.
I really should update my bits on here, I don't even own the BB9 anymore

89 UKDM BA4 4WS (resto job!) · Post by **wurlycorner** » Thu Aug 06, 2020 9:38 am

Ah that's a massive shame.
Any pics? Curious