Page 1 of 1
H23 Fuel Rail and Injectors
Posted: Mon Oct 05, 2020 4:32 pm
by Steve0385
Hi all,
As above, looking for a standard fuel rail and injectors for a H23 engine.
Thanks
Steve
H23 Fuel Rail and Injectors
Posted: Fri Oct 16, 2020 4:04 pm
by Steve0385
If anyone knows if the h22 rail and injectors will work, would happily take that too!!
Thanks
H23 Fuel Rail and Injectors
Posted: Fri Oct 16, 2020 5:56 pm
by Brozilla
It would help if we knew the car/ECU/wiring you plan to use this on. Since you are in search for H23 parts, I suspect it is 4th gen Prelude. In that case your cheapest option is using f20 rail and 240 cc injectors. H22 rail will also fit, but fuel pressure regulator might be different, I will get back at you about that.
Beware of impedance on injectors. If they are low-impedance then you don't need anything else. If they are high-impedance then you will have to replace you injector connectors and remove your resistor box. Injectors can also be acquired from B and D series engines equipped with VTEC, as all of them have the same 240cc injectors.
H23 Fuel Rail and Injectors
Posted: Wed Oct 21, 2020 5:35 pm
by Steve0385
Brozilla wrote: ↑Fri Oct 16, 2020 5:56 pm
It would help if we knew the car/ECU/wiring you plan to use this on. Since you are in search for H23 parts, I suspect it is 4th gen Prelude. In that case your cheapest option is using f20 rail and 240 cc injectors. H22 rail will also fit, but fuel pressure regulator might be different, I will get back at you about that.
Beware of impedance on injectors. If they are low-impedance then you don't need anything else. If they are high-impedance then you will have to replace you injector connectors and remove your resistor box. Injectors can also be acquired from B and D series engines equipped with VTEC, as all of them have the same 240cc injectors.
Thanks for the reply!
Sorry, Yes I have a 4th gen prelude, it has a stock ecu and wiring.
Ok, I will have a search for those parts.
Really appreciate the help!
Steve