Lude Generation

Hi guys,

I'm after the H22a Injector Rail, Fuel Regulator & Injectors please. I have a over fuelling issue and want to replace the complete system.

Please let me know if you have a working set.

Cheers

Some one breaking a 4th gen engine on eBay of that helps item number 275284588798

pretty sure i have the H22a Injector Rail & Fuel Regulator, dont think i have any injectors though

Drax wrote: ↑

Mon Apr 25, 2022 8:49 am

pretty sure i have the H22a Injector Rail & Fuel Regulator, dont think i have any injectors though

I'd still be interested mate. Let me know how much would want.

Cheers

arif_manji wrote: ↑

Mon Apr 25, 2022 10:27 am

I'd still be interested mate. Let me know how much would want.

ive found a spare rail but nothing else, i suspect my old rail & regulator was sold along with the old engine.

rail is £15 plus postage, of which i can get an estimate if you like, shouldnt be much.

Drax wrote: ↑

Thu Apr 28, 2022 9:21 pm

arif_manji wrote: ↑

Mon Apr 25, 2022 10:27 am

I'd still be interested mate. Let me know how much would want.

ive found a spare rail but nothing else, i suspect my old rail & regulator was sold along with the old engine.

rail is £15 plus postage, of which i can get an estimate if you like, shouldnt be much.

@Drax thanks for the offer mate. I'm after the the whole thing inc injectors too if possible. Also I have now ordered some HT leads as I think it could be that as even when it is running, its revs hesitantly.

Hi Arif,
I have what your looking for. fpr,rail and injectors. The injectors and filters have all been cleaned. So its all ready to fit. The only thing i havent done was replace the seals/orings.
Do you need an injector resistor box as well?
I take it you will have checked the dizzy and main fuel relay already

vanzep wrote: ↑

Sat Apr 30, 2022 8:01 pm

Hi Arif,
I have what your looking for. fpr,rail and injectors. The injectors and filters have all been cleaned. So its all ready to fit. The only thing i havent done was replace the seals/orings.
Do you need an injector resistor box as well?
I take it you will have checked the dizzy and main fuel relay already

Hi @vanzep!

Ah excellent - I'll be in touch shortly. My plan this week is to replace the HT leads and plugs inc complete dizzy from my H23 breaker. Last few days I think the issues is one of those. The plugs are not the Iridium ones and HT leads look a little tight (so probably the wrong ones too). If that all fails, ill replace the injectors inc rail and regulator.

arif_manji wrote: ↑

Sat Apr 30, 2022 10:11 am

@Drax thanks for the offer mate. I'm after the the whole thing inc injectors too if possible. Also I have now ordered some HT leads as I think it could be that as even when it is running, its revs hesitantly.

no worries

If you can't get hold of the HT components give me a shout, I have a full set that I replaced as a matter of course during normal servicing. Leads/cap/arm/plugs plus I think I have a couple of semi-complete distributors somehow (5th gen). Trying to have a garage tidy up and can't bring myself to throw parts away.