H22A2 Parts Search

serik · Post by **serik** » Fri Jan 18, 2013 12:02 pm

Hello. I need P13 ECU EUDM. And P13 injectors with knock sensor.
Does anyone have it?

Post by **Merlin** » Fri Jan 18, 2013 12:17 pm

Welcome to LG!!

The H22a2 and H22a5 do not have a knock sensor from the factory so if your running a UK / European P13 you dont need one

I think I have a UK P13 sitting spare. I will have a look.

Where are you from?

serik · Post by **serik** » Fri Jan 18, 2013 9:09 pm

I come from Germany.
I know that EU P13 ECU have no knock sensor, I also have one at home P13JDM ECU and thus does not want to run.
Engine is a H22A5.

mercutio · Post by **mercutio** » Fri Jan 18, 2013 9:11 pm

@Bri should have the bits you need eudm p13 dont have knock sensors though

Bri · Post by **Bri** » Fri Jan 18, 2013 9:23 pm

If Merlin dont have one I will sort you out, I have one or two

serik · Post by **serik** » Fri Jan 18, 2013 9:51 pm

Let us be ...

I Prelude BB2 (2.3)

Did they swap H22A5.

Tried to move it with P13 JDM ECU.

It is not runing,reports knock sensor.

Already have an OEM off and on E-Bay.

345cc injectors are OBD1 drine, ignition is set correctly.

mercutio · Post by **mercutio** » Fri Jan 18, 2013 9:54 pm

so you have a ukdm h22 and a jdm ecu so all you need is a ukdm p13 ecu and you will be golden unless you want to run the jdm ecu in which case you will need the knock sensor

serik · Post by **serik** » Fri Jan 18, 2013 10:00 pm

I have H22A5(EU) with P13 JDM...

mercutio · Post by **mercutio** » Fri Jan 18, 2013 10:50 pm

but its in place of a h23 so will already be obd1 so right on the level i was on

mercutio · Post by **mercutio** » Fri Jan 18, 2013 11:35 pm

doesnt mean he is using the obd2 harness or inlet or injectors maybe the op should post up what exctly he has done with the swap
if he has a p13 in then he cant be using the obd2 harness it wont plug in