Low comp pistons

FrontBackSide2Side · Post by **FrontBackSide2Side** » Tue Feb 26, 2013 6:49 pm

Im after some low compression pistons for my h22a. They must be unused so looking for someone whos abandoned a project or changed direction.

ideally Im after something like 87mm 9.5:1 and must be a decent piston such as wiseco or cp.

But let me know what you've got

Danni22 · Post by **Danni22** » Fri Mar 01, 2013 4:35 pm

Get on US ebay buddy that's where I'm getting mine from not a bad price for a rod and piston set

EG_H22 · Post by **EG_H22** » Fri Mar 01, 2013 4:51 pm

Thought u was going supercharged dan.

Bro ebay.com have wisecos for £300 plus postage im buying mine end of the month.
Sleeves im just going to go with some drys though.

Danni22 · Post by **Danni22** » Fri Mar 01, 2013 11:23 pm

EG_H22 wrote:Thought u was going supercharged dan.

Bro ebay.com have wisecos for £300 plus postage im buying mine end of the month.
Sleeves im just going to go with some drys though.

Still going to be sleeving and going forged buddy

..

EG_H22 · Post by **EG_H22** » Sat Mar 02, 2013 8:23 am

I was told last night from endless horizon, that if done right my block can produce 400bhp piece of body lemonade on a stock block.
Using wossner pistons but their like £550-600.
With a slight bore and good tune

mercutio · Post by **mercutio** » Sat Mar 02, 2013 8:25 am

so are wossner pistons frm friendly?

Supercharged 無限MUGEN BB1 Profile · Post by **nucleustylzlude** » Sat Mar 02, 2013 10:33 am

?

I would imagine the lude community would know about these if that was the case. Not much info on them out there. But they do say they have a skirt coating - could it be a similar system to the Mahles?

There's one man out there that would most likely know. - Rich? @PerformanceAutoworks

EG_H22 · Post by **EG_H22** » Sat Mar 02, 2013 12:43 pm

Apparently they are yes.
When i spoke to rich he said that he'd use mahle golds on a stock block.
Shame that there aint many of you guys that are running boost so not able to give info u know.

Danni22 · Post by **Danni22** » Sat Mar 02, 2013 1:17 pm

Stock sleeve combo
http://realstreetperformance.com/store/ ... a-482.html

At just shy of $900 that's not bad if you ask me.. I might even consider them save the money from sleeving to put into something els

FrontBackSide2Side · Post by **FrontBackSide2Side** » Sat Mar 02, 2013 1:25 pm

I've read about a lot of cases where these Mahle pistons have failed which puts me off. The coating seems to wear, you never know if its been built wrong though that's the problem.

Lude Generation

Low comp pistons

Low comp pistons

Re: Low comp pistons