Lude Generation

Posted: **Tue Feb 26, 2013 11:14 pm**

In need asap

Posted: **Tue Feb 26, 2013 11:15 pm**

4ths will fit

Posted: **Tue Feb 26, 2013 11:24 pm**

Or 4th's then please

Got any spares phil ?

Posted: **Tue Feb 26, 2013 11:27 pm**

no, one thing i dont have spare

Posted: **Wed Feb 27, 2013 9:16 am**

@Newkid?

Posted: **Wed Feb 27, 2013 1:56 pm**

Dammit lol. The bolts on mine are STUCK. Completely stuck. I smashed the crap outa it with a hammer last night for an hour and no joy at all.

Posted: **Wed Feb 27, 2013 2:24 pm**

Lewis - It sounds like the only way you are going to get them out is by sawing right through the bolts. If the bolts are stuck fast that means the bushes are more than likely done for as well. You will need to replace both bushes, bolts, nuts, and camber plates. Further bad news is that Honda dont sell the 5th gen bush for that arm separately, they want to bend you over and take £319 for each whole arm.

The solution is to use 4th gen bushes:

4th gen rear LCA bush - 52354-SS0-023 (£25.76 each)
Camber bolt - 52387-SM4-962 (£15.72 each)
Camber plate - 52388-SM4-960 (£5.03 each)
Nut - 90366-SF1-J62 (£7.79 each)

I did this for my 5th gen and they all fit perfectly

Are you polybushing, fitting a lower brace, or something?

Posted: **Wed Feb 27, 2013 5:35 pm**

Another thing to do is heat the bolts up with a blowtorch and plenty of wd-40.. works every time.. never had a problem working on Dino's 5th gen that i was nicking all the suspension off

Posted: **Wed Feb 27, 2013 5:56 pm**

I had to get brutal with mine.....

Even once off the car, I had to press the seized bushes out of the arm.....

Posted: **Wed Feb 27, 2013 6:16 pm**

Who else uses a blow torch?? serious buy one.. its will solve all your problems.

Lude Generation

5th gen rear lca's

5th gen rear lca's