My exhaust system is completely corroded.
It’s got holes and also not good for the MOT.
I’m searching for a replacement OEM system so that I can put my access muffler on to the back to keep the car OEM and JDM.
But if I can get a good aftermarket system which is direct bolt on that I can do my self then it’s fine too.
I think all 2.2 U.K. and JDM ones will fit. Only the Type-S has a shorter centre section due to clearing the atts unit at the downpipe bit.
Thank you
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Exhaust
-
Sailor
- Supporter 2016
- Posts: 3272
- Joined: Tue Jul 17, 2012 7:36 pm
- My Generation: 0G
- Location: Hampshire
- Has thanked: 53 times
- Been thanked: 113 times
- Contact:
Exhaust
I've still got these, Nitin.
The triangular box is standard a5 as far as I know. I think the stainless pieces also came off an a5.
If you want to come to Hampshire and take them away before I weigh them in, you'd be most welcome.
The triangular box is standard a5 as far as I know. I think the stainless pieces also came off an a5.
If you want to come to Hampshire and take them away before I weigh them in, you'd be most welcome.
International Pensioner of Mystery