Lude Generation

Hi all, I am looking for a 4th gen OEM exhaust manifold JDM 2.2vtec
I think ukdm manifold is the same. If it has heat shields that would be a bonus.

I bought a stainless manifold and down pipe a few years ago that were supposedly off a 5th gen, but when I went to have them installed they were off a 4th Gen.
You can have them for what I paid for them if you're interested?

Thanks for the offer
but ideally 4th gen OEM manifold is what im looking for.
I wanted to see if replacing the fujitsubo mani with oem mani would cut down/ stop vibration.
Rest of system is oem inc cat.
Very bad vibration from 3-5k rpm all gears.

Had a very quick look today - not sure but think it could possibly be heatshield or something that is touching the gear shift cables as vibration is running right up the gear stick.
Looks like I will have to drop the whole exhaust and check it over before refitting and also new mani to downpipe gasket as there is a blow.

i think i only have a spare aftermarket manifold, not an OEM one but ill try and double check tonight...

Thanks Drax. If you could look for an OEM mani that would be great.
Ive got an aftermarket stnls mani here it does fit to the spare oem downpipe - going to check that it fits as the mani may be a bit taller than oem so would have to check fitment. Height is 55cm or 21 1/2 inches
pic below

Is it 5th gen has different one ? I've got oem one but from H22a8 from my old 5th gen

this is what i found last night, looks to be an oem one? do you want me to measure it up?

nice one Drax - that does look like 4th gen mani
can you please measure the distance between studs on either side - centre to centre I need it to be 12cm
if you could also measure max height of the mani top to bottom.
much appreciated

Is it 5th gen has different one ? I've got oem one but from H22a8 from my old 5th gen


Thanks Stefan - I already have a 5th gen mani from H22a8 and it doesnt fit the downpipe.

vanzep wrote: ↑

Mon Apr 28, 2025 3:18 pm

.
I wanted to see if replacing the fujitsubo mani with oem mani would cut down/ stop vibration.

Can honestly say I haven’t noticed any vibration from having fitted fuji’s to mine - neither are with an oem exhaust so it’s not a direct comparison, but I’d have thought that would only make it worse anyway? I just don’t get anything at all from the exhaust system.