Page 1 of 1
M2B4 Driveshafts
Posted: Sat Jun 01, 2013 2:25 pm
by Ailfenergy
Looking for driveshafts to fit this gearbox
Posted: Sat Jun 01, 2013 2:44 pm
by 4thgenphil
they are the same as a non lsd, the only differences are between auto's and manual for the vtecs. 4th and 5th gens are different, oh and whether you have abs or not
Posted: Sat Jun 01, 2013 2:54 pm
by Ailfenergy
I'm planning to swap my h22a5 and m2x5 gearbox to h22a with m2b4 gearbox. My driveshafts won't fit. I've got 5g but the engine and the gearbox are from 4g.
Posted: Sat Jun 01, 2013 3:03 pm
by wurlycorner
Plenty of options around at the moment if you have a look on parts/breaking sections.
Possibles off the top of my head are JDM-BB4, GJM-HONDA2012, Riverghost, nick_riptide, 4th gen doug for starters!
Posted: Sat Jun 01, 2013 3:58 pm
by mercutio
pretty sure they will fit buddy @Alex put an m2b4 in his
Posted: Sat Jun 01, 2013 5:19 pm
by Donald
You're all forgetting that Ailfe has the EuDM VTiS... which has ATTS.
Posted: Sat Jun 01, 2013 5:23 pm
by 4thgenphil
Donald wrote:You're all forgetting that Ailfe has the EuDM VTiS... which has ATTS.
what?
Posted: Sat Jun 01, 2013 5:30 pm
by Donald
He has a mainland Europe only model, the VTiS which has ATTS but either the A5 or A8 engine. I would assume the ATTS has special driveshafts or something. He's replaced the engine and gearbox but not the driveshafts, which if they're anything like the rest of the ATTS stuff only work if you have the right gizmo, which in this case would be the M2X5 ATTS gearbox. Same as you can't put the M2U4 box from the TypeS into non-ATTS Preludes.
Posted: Sat Jun 01, 2013 5:43 pm
by JDM-BB4
I have 2 x uk drivers side (shorter)shafts from a manual bb4 mdb4.
Posted: Sun Jun 02, 2013 9:10 am
by Ted
I have a pair out of edds 5th (m2b4 box) £50 plus postage