Lude Generation

Seems that I have lost some bits in the movement of my interior parts around the country


Prefacelift switch surround that sits behind the hand brake. Just the surround bit with 4 holes in it. Will need 2 blanking pieces as only 2 switches are used.


12 or so of the small screws that hold the front interior / dash in place.


Plastic lugs that hold the rear center console on, 2 small top, 2 large middle




4 of the these metal fixings (actually for the rear boot trim)




2 plastic lugs for the bottom of the ski hatch surround




Plastic lugs that hold the boot interior sides and front in place





Also, now I have removed the 4WS system, there is nothing really for the front boot lining to hold onto apart from one lug hole...



Also the penny tray that sits under the steering wheel to the right hand side. It's the small slidy out tray.


Also the boot floor that sits ontop of the spare wheel. Bit of pain this one because of the size.

I'll see what I have, Bits off the UKDM will do most

Ive gt the small coin tray under the steering wheel

Bloody hell if you had posted this last week I would of had all that but now its in the bin as I thought most of the interior wouldn't be wanted. Good luck with your search

Ahh Wiggz, JDM boot floor you could have sold mate

Sods law dictates that everything will turn up once I have the new bits

POST EDITED TO INCLUDE: Prefacelift switch surround that sits behind the hand brake. Just the surround bit with 4 holes in it. Will need 2 blanking pieces as only 2 switches are used.

I'll PM you Terry

Cheers ammo, just noticed someone in Mansfield breaking, with all interior parts, might be easier with picking up the larger items...will let you know

Thanks to Ammo