Page 1 of 2
REQUIRED. REAR HUB
Posted: Mon Jul 15, 2013 12:19 pm
by honda-hardy
I require a complete rear hub for a 4 stud 2.0 litre 5th gen.
4ths should be the same?
i need the hub with bearings and 4 studs also abs ring still needs to be attached, nut, washer if fitted, i also need the stub axle the hub bolts onto. also the bolts required to fit the stub to the axle.
basicaly everything to attach the wheel to the axle. what have you got?
Edit:
its the nsr one.
Posted: Mon Jul 15, 2013 6:09 pm
by mercutio
you will need to state which side if you want the stub axle as well buddy
Posted: Mon Jul 15, 2013 7:40 pm
by honda-hardy
ILL GET ON TO IT?
Posted: Mon Jul 15, 2013 7:59 pm
by NafemanNathan
Yes 4th's are the same. Just removed mine from the project Sam, but after 3 years it'd be a bit of a gamble as to the state of the bearings, plus there are no ABS rings.
Posted: Mon Jul 15, 2013 8:39 pm
by honda-hardy
cheers for the offer nath, but i need a good known working one for a friend of a friend.
also its the nsr kirbside one that im after.
made me laugh though. the guy who is looking for it, went to a scrap yard for one, and came back to his mechanic with just a rear brake disc.
Posted: Mon Jul 15, 2013 8:40 pm
by mercutio
Posted: Wed Jul 17, 2013 5:25 pm
by honda-hardy
Bump anyone? Also need a bonnet to for a 5th. Paint not an issue as he wants to wrap it
Posted: Wed Jul 17, 2013 6:15 pm
by Donald
Why don't they sign up here and deal with it themselves?
Saves you a load of faffing at least.
Posted: Wed Jul 17, 2013 7:46 pm
by honda-hardy
coz i have not met him yet, plus i can make £ fixing it all for him too.
Posted: Wed Jul 17, 2013 7:46 pm
by honda-hardy
@crunchyadams82