Lude Generation

Hi chaps,

I need the rear right ABS sensor for my 4g. The 2.0 and 2.2 are the same.

Has anyone got one knocking around I could buy off them?

Giomani

Think I might. I know one of the rear ones was knackered but the other was fine. I'll check it out for you.

If Andy does not have them i have.

I'll let you know shortly Sam.

Will do.

Awesome guys let me know what you find..

G

I just found out u can test the resistance to ensure u have a worker or not.

Fronts 700~1100 Ω
Rears 1000~1600 Ω

U can also swap over the brackets so any rear sensor will work for u. I've dont it. It helps when sourcing the part...

This is true (I've done it - swap the brackets off your old broken sensor onto the new one). I didn't expect it to last long tbh, because you're reversing the cable bends (asking cable to bend the complete opposite way to how it has done for 20 years) but so far so good.

Be careful when you bend the tabs on the bracket back to free the cable, so you don't pinch the cable and break it internally and then make sure the cable recess is properly cleaned out of any dirt/rust high spots before putting the cable back in, for the same reason.

The clamps also need to be swapped and they need to moved along the cable slighty (they're not in exactly the same place for some reason).

I don't want to be a pain, but I need one of these in a bit of a rush.. so can one of you fine gentleman give me a price so I can get one on the way... I'd rather get one off here than an ebay breaker.

Cheers guys,

G

I have from 5th gen, if they are the same or you need one from 5th gen you can have it for 25 pounds delivere