JC's 94 JDM SI-Vtec

[94-si-vtec-jdm]

Thanks but the paint on the wheels was really bad. So after I finished playing with the drop links and brakes, yesterday afternoon/evening I decided to do some wheel prep and spraying.

Before;


Prepping;


Spraying (just the backs at the moment, colour to come later);

[94-si-vtec-jdm]

I was trying to figure out how I was going to refit the internals from the old rear brake caliper pistons into the new ones I'd bought. Got them out fine, just had to hunt around for the circlip after it went flying

I took the new pistons and old internals to work, found a short piece of 1/2" schedule 40 pipe and a vice...........

Internals from right to left in order of being put into the piston;


The tricky bit, it helps if you can get a small flat head or two down the side of the pipe to help ease the circlip into position and then wind in until it clicks;


Done;