here's how it currently is;
all 3 of the hoses are connected to one T piece and going to the inlet manifold, leaving the fuel vac on its own to go into the inlet manifold further down.
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Drax's JUN Prelude: Papa Smurf edition
-
Drax
- Moderator
- Posts: 6341
- Joined: Wed Dec 22, 2010 4:05 pm
- My Generation: 4G
- Location: Wrexham, North Wales
- Has thanked: 24 times
- Been thanked: 430 times
Drax's JUN Prelude: Papa Smurf edition
another update on this - big thank you to Vtecmec, moving around those vac hoses helped a lot! still have a slight misfire, but theres no more tonnes of smoke out of the exhaust, no more overfueling smell and black crap being thrown out, the idle is much better and no more TPS sensor warning either!
here's how it currently is;
all 3 of the hoses are connected to one T piece and going to the inlet manifold, leaving the fuel vac on its own to go into the inlet manifold further down.
here's how it currently is;
all 3 of the hoses are connected to one T piece and going to the inlet manifold, leaving the fuel vac on its own to go into the inlet manifold further down.
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
FOR PAUL
FOR PAUL
-
wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21492
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 2481 times
- Been thanked: 306 times
Drax's JUN Prelude: Papa Smurf edition
Brilliant to hear some progress.
--
Iain.
Iain.
Super Secret 1G (not really super secret!)
