Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

spud's track slag
-
- Posts: 1127
- Joined: Fri Jul 27, 2012 6:23 am
- My Generation: 4G
- PSN GamerTag: starletgt123
- Has thanked: 3 times
- Been thanked: 5 times
Re: spud's track slag
Why would you think we are useing so much pad on are track days ? Now the track we use is notorious for eating pads there is 2 big stops from 120-130mph down to about 40 then 50 but there's 330i bmw lasting new a full year of track days on yellow stuff and are friends in the mr2 would get over half the year to. Any thoughts?
-
- Posts: 1127
- Joined: Fri Jul 27, 2012 6:23 am
- My Generation: 4G
- PSN GamerTag: starletgt123
- Has thanked: 3 times
- Been thanked: 5 times
Re: spud's track slag
Was talking to race boys there and they said that sounds about right that the pads were tgat much if your really going for it so mybe ok
-
- Posts: 1127
- Joined: Fri Jul 27, 2012 6:23 am
- My Generation: 4G
- PSN GamerTag: starletgt123
- Has thanked: 3 times
- Been thanked: 5 times
Re: spud's track slag
There was a bit hole down at above the side skirt so I nocked most of the rust out of it the stuffed paper and sealer in the hole then filled over it with body filler
see how long it lasts



-
- Posts: 1127
- Joined: Fri Jul 27, 2012 6:23 am
- My Generation: 4G
- PSN GamerTag: starletgt123
- Has thanked: 3 times
- Been thanked: 5 times
Re: spud's track slag
Na not properly merlin pal just grinded off the rust then filled it and put bit of primer over her its just to have it nice a smoth for his work stickers to go over. The rust will come back at some point 
