
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

Ratty's Type S...Jap Performance Magazine porno
- RattyMcClelland
- Moderator
- Posts: 9208
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 203 times
Re: Ratty's Thaipess *PIC WHORE*
Now what a perfect day it is today. I can get much done.
Spent the best part of 2 hours masking the car up to reveal the shut lines. Iv already done the under bonnet wing shut lines.



I have the inside door edges exposed for some colour too as well as the inner part of the bootlid.
The paint air dries nicely today as the ambient temp is 14degrees and panel temp in the semi sun is 23degrees C. PERFECT for waterbased colour.
As we speak the Clearcoat is curing. Im mostly air curing it for several hours but i have the heat lamps onthem too.
Car is booked into the bodyshop on Monday morning 22nd April. I should only take me 4 hours to get the colour on, clearcoated and cured in the oven for 1hr. Must drive home from mansfield carefully though. Fresh paint hours old and motorways
Spent the best part of 2 hours masking the car up to reveal the shut lines. Iv already done the under bonnet wing shut lines.



I have the inside door edges exposed for some colour too as well as the inner part of the bootlid.
The paint air dries nicely today as the ambient temp is 14degrees and panel temp in the semi sun is 23degrees C. PERFECT for waterbased colour.
As we speak the Clearcoat is curing. Im mostly air curing it for several hours but i have the heat lamps onthem too.
Car is booked into the bodyshop on Monday morning 22nd April. I should only take me 4 hours to get the colour on, clearcoated and cured in the oven for 1hr. Must drive home from mansfield carefully though. Fresh paint hours old and motorways


- rob quilter
- Supporter 2014
- Posts: 5331
- Joined: Mon Aug 09, 2010 1:40 pm
- My Generation: 5G
- PSN GamerTag: robquilter
- Location: Derby
Epic stuff


PERFORMANCE PARTS FOR JAPANESE CARS - http://WWW.TOKYOSQUAD.COM
FOLLOW US ON FACEBOOK - http://WWW.FACEBOOK.COM/TOKYOSQUAD
FOLLOW US ON FACEBOOK - http://WWW.FACEBOOK.COM/TOKYOSQUAD
- honda-hardy
- Club Cartographer
- Posts: 6268
- Joined: Sat Jan 28, 2012 7:35 pm
- My Generation: 5G
- Location: chippenham
- Been thanked: 1 time
- RattyMcClelland
- Moderator
- Posts: 9208
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 203 times
Re: Ratty's Thaipess *PIC WHORE*
WHEEL REFURB QUICK TIDY UP
The turd of a wheel

Sanded back with 180 on a palm DA
Then onto filler the scuffs with gel and hardener



The sanded macked and etch primed.

The threw 3 layers of Audi L8AU folled by a 2k matt lacquer and baked off for 3o mins at 60degrees.


Took me about 1hour 20mins per wheel from start to finish. Prepped nother wheel whilst the other was curing off.
The turd of a wheel

Sanded back with 180 on a palm DA
Then onto filler the scuffs with gel and hardener



The sanded macked and etch primed.

The threw 3 layers of Audi L8AU folled by a 2k matt lacquer and baked off for 3o mins at 60degrees.


Took me about 1hour 20mins per wheel from start to finish. Prepped nother wheel whilst the other was curing off.

