Toads 5th Gen
Posted: Tue May 25, 2021 9:39 am
2.0 can move, you just have to throw another Lude's value at it 
Yer ive had 2. Sure they can move, just very slowly.
Page 18 of 20
Toads 5th Gen
Posted: Tue May 25, 2021 11:17 am
Toads 5th Gen
Posted: Tue May 25, 2021 11:22 am
Looks great, how does it sound?
Toads 5th Gen
Posted: Tue May 25, 2021 4:35 pm
RattyMcClelland wrote: ↑Tue May 25, 2021 11:17 amYer ive had 2. Sure they can move, just very slowly.
I prefer a gentle cruise these day's at My age
Sound is just right not too loud very similar to the one I took off.
The exhaust is made by Fox in Germany.
I just had Powerflow make the extender.
Cheers all
Toadster
Toads 5th Gen
Posted: Tue May 25, 2021 6:01 pm
Nice one - good result there 
Toads 5th Gen
Posted: Tue May 25, 2021 6:31 pm
I'm liking these pipes 
motor is looking good T
motor is looking good TToads 5th Gen
Posted: Mon Jun 14, 2021 5:07 pm
Lo All 
I had My Ludes headlight's refurbed again today by the Guy who did them three years ago.
He used a new ceramic coating to finish them off which is UV resistant so should last a lot longer
Here are before and after pics.
Cheers
Toadster
I had My Ludes headlight's refurbed again today by the Guy who did them three years ago.
He used a new ceramic coating to finish them off which is UV resistant so should last a lot longer
Here are before and after pics.
Cheers
Toadster
Toads 5th Gen
Posted: Mon Jun 14, 2021 5:15 pm
Looks good, what was the process with this, are they sanded first or just polished and then ceramic coated?
I just did mine, sanded up to 1500 grit, then a few coats of 2K clear, came out same as yours, its the best results I've had so far and I've sanded and polished a few sets with just OK results.
I just did mine, sanded up to 1500 grit, then a few coats of 2K clear, came out same as yours, its the best results I've had so far and I've sanded and polished a few sets with just OK results.
Toads 5th Gen
Posted: Mon Jun 14, 2021 5:49 pm
Lo
Yep He machine rubbed them down using different grades of sanding discs.
Then applied a very thin ceramic coating that is 100% UV resistant.
He gets the coating from the US.
Yesterday He did a BMW X5 that He said was the worst He had ever seen.
The Guy had tried to do them Himself a few years ago with very harsh sandpaper then spray coated with very thick spray lacquer.
It took Him hours just to get the stuff off
Cheers
Toadster
Yep He machine rubbed them down using different grades of sanding discs.
Then applied a very thin ceramic coating that is 100% UV resistant.
He gets the coating from the US.
Yesterday He did a BMW X5 that He said was the worst He had ever seen.
The Guy had tried to do them Himself a few years ago with very harsh sandpaper then spray coated with very thick spray lacquer.
It took Him hours just to get the stuff off
Cheers
Toadster
Toads 5th Gen
Posted: Mon Jun 14, 2021 6:40 pm
I do alot of headlight refurbs for my customers whilst doing bumper scuffs.
Far easier to just 400 grit the old yellow lacquer off, finish with 800 and then relacquer. They'll last forever and a day then.
Far easier to just 400 grit the old yellow lacquer off, finish with 800 and then relacquer. They'll last forever and a day then.